MRC Commercialisation Matching

COMMERCIALIZATION
MATCHING PLATFORM

FIND YOUR MATCH HERE

Total of 313 item(s) found

ORBITAL SHAKER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : AGITATE SAMPLES IN A CIRCULAR MOTION AT VARIOUS LABORATORY SETTING.
General Specifications :
Capacity :

KRUSS EASYDROP

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE CONTACT ANGLE (WETTING ANGLE) IS A MEASURE OF THE WETTABILITY OF A SOLID BY A LIQUID.
General Specifications :
Capacity :

BLENDER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : PRE-MIXING BEFORE CURING: BEFORE RUBBER COMPOUNDS ARE CURED OR VULCANIZED, THEY OFTEN REQUIRE THOROUGH MIXING TO ENSURE THAT ALL COMPONENTS ARE HOMOGENEOUSLY COMBINED.
General Specifications : PLASTIC OR RUBBER
Capacity : 50 SAMPLE/DAY

CRYOULTRAMICROTOME

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : CRYOULTRAMICROTOMY IS A METHOD FOR CUTTING SPECIMENS INTO THIN SECTIONS AT LOW TEMPERATURES FOR MICROSCOPIC EXAMINATIONS . IT IS USED FOR CRYO-SECTIONING OF POLYMER SAMPLES SUCH AS RAW RUBBER, LATEX FILM, PLASTIC AND RUBBER COMPOUND WHICH IS DIFFICULT TO SECTION AT ROOM TEMPERATURES. THE THIN SECTIONS OBTAINED BY ULTRAMICROTOME CAN BE USED FOR VIEWING UNDER MICROSCOPES SUCH AS TEM , SEM, AFM AND LM.
General Specifications :
Capacity :

MICROMETER CALIPER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : A TOOL FOR MEASURING THE LENGTH OR DIAMETER OF AN OBJECT.
General Specifications :
Capacity :

ABRASION TESTING MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE ABRASION TESTING MACHINE SIMULATES ABRASION CONDITION WHICH IS USED TO EVALUATE THE EFFECT OF ABRASION RESISTANCE OF RUBBER MATERIALS. THE TEST IS USED TO DETERMINE THE ABRASION RESISTANCE IN TERMS OF WEAR DEPTH OF MATERIAL IN MM.
General Specifications :
Capacity :

HIGH PERFORMANCE THIN-LAYER CHROMATOGRAPHY (HPTLC)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : HPTLC IS THE MOST ADVANCED FORM OF TLC AND COMPRISES THE USE OF CHROMATOGRAPHIC LAYERS OF UTMOST SEPARATION EFFICIENCY WITH PRECISE SAMPLE APPLICATION, STANDARDIZED REPRODUCIBLE CHROMATOGRAM DEVELOPMENT AND SOFTWARE CONTROLLED EVALUATION. CONTROLLED BY POWERFUL AND DEDICATED SOFTWARE; THE TLC VISUALIZER CAN GENERATE LOW-NOISE, HIGH-DYNAMIC-RANGE IMAGES AND A SOPHISTICATED ALGORITHMS ENSURE BEST IMAGE QUALITY FOR IDENTIFICATION OF EVEN THE WEAKEST ZONES. THE SYSTEM PROVIDES ILLUMINATION WITH WHITE LIGHT (REMISSION, TRANSMISSION OR A COMBINATION OF BOTH), UV 254 NM AND UV 366 NM. THESE FEATURES ENABLE DETECTION OF CHEMICAL COMPOUNDS WITHOUT SPRAYING REAGENT.
General Specifications :
Capacity :

UNCONFINED COMPRESSIVE STRENGTH APPARATUS

Organisation : UNIVERSITI MALAYSIA SARAWAK (UNIMAS)
Function : TO DETERMINE THE UNCONFINED COMPRESSIVE STRENGTH OF THE STABILIZED PEAT USING CEMENT, SAND AND RUBBER CRUMBS
General Specifications : BS1377: PART 7: 1990
Capacity : -

LASER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : PROCESS DATA SUCH AS DOCUMENTS CREATED ON A COMPUTER AND OUTPUT THEM ON PAPER.
General Specifications :
Capacity :

PPMU-MJIIT/ FOURIER TRANSFORM INFRARED SPECTROSCOPY (FTIR)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : IDENTIFY THE FUNCTIONAL GROUPS PRESENT IN SAMPLES BY MEASURING THEIR ABSORPTION OF INFRARED RADIATION OVER A RANGE OF WAVELENGTHS
General Specifications : SOLID, LIQUID AND POWDER SAMPLES
Capacity : -

PYROLYZER-GAS CHROMATOGRAPHY X GAS CHROMATOGRAPHY-TIME OF FLIGHT-MASS SPECTROMETER (PY-GCXGC-TOF-MS)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : PY-GCXGC-TOF-MS IS A COMPREHENSIVE 4D TECHNIQUE USED FOR THE ANALYSIS OF COMPLEX MATERIALS, SUCH AS POLYMERS, PLASTICS, BIOMATERIALS, AND ORGANIC SUBSTANCES. GCXGC-TOF-MS PROVIDES TWO-DIMENSIONAL CHROMATOGRAPHIC SEPARATION WITH HIGH-QUALITY MASS RESOLUTION THAT ENABLES PRECISE DETERMINATION AND ACCURATE COMPOUND IDENTIFICATION. IT ALSO PROVIDES VALUABLE STRUCTURAL INFORMATION ABOUT THE COMPOUNDS PRESENT IN THE SAMPLE, AIDING IN THE ELUCIDATION OF CHEMICAL STRUCTURES. SOME OF OTHER APPLICATIONS INCLUDE QUALITY CONTROL BY ASSESSING THE CONSISTENCY AND COMPOSITION OF POLYMER, THERMAL STABILITY STUDY, ADDITIVE ANALYSIS, BLENDING AND COMPATIBILITY STUDIES, FAILURE ANALYSIS, ENVIRONMENTAL ANALYSIS, AND REVERSE ENGINEERING OF THE RUBBER COMPOUND AND PRODUCTS.
General Specifications :
Capacity :

AUTO BUFFING MACHINE WITH DUST COLLECTOR

Organisation : NANOMALAYSIA BERHAD (NMB)
Function : AUTO BUFFING MACHINE IS USED TO ENHANCE THE METAL SURFACE. BY REMOVING THE DULL OUTLOOK OF THE METAL SURFACES AND GIVE IT A REFINED NEW LOOK
General Specifications : -
Capacity : -

PYROLISER- GAS CHROMATOGRAPHY-MASS SPECTROMETER (PY-GCMS)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : PY-GCMS IS A ROBUST AND SIMPLE TECHNIQUE THAT COMBINES A PYROLYZER WITH A GAS CHROMATOGRAPHY MASS SPECTROMETER (GC/MS) INSTRUMENT. THIS APPROACH EMPLOYS SUFFICIENT HEAT TO BREAK DOWN THE ORGANIC BONDS OF A COMPLEX SPECIES INTO SMALLER AND MORE STABLE MOLECULES KNOWN AS PYROLYZATES. THE RELATIVE INTENSITIES OF THE PYROLYZATES AS THEY DEVELOP REVEAL INFORMATION ABOUT THE NATURE OF THE ORIGINAL MATERIAL. IT IS A POWERFUL METHOD FOR QUALITATIVELY AND QUANTITATIVELY DETERMINING COMPLICATED POLYMERS, COPOLYMERS, VOLATILES, AND ADDITIVES.
General Specifications :
Capacity :

ELEMENTAL ANALYSIS / CHNOS

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : FOR DETERMINATION OF CARBON, HYDROGEN, NITROGEN AND SULPHUR IN RUBBER AND RUBBER PRODUCTS, SOIL, PLANT AND FERTILISER.
General Specifications :
Capacity :

THERMAL GRAVIMETRIC ANALYZER (TGA)

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : 1. THERMOGRAVIMETRIC ANALYSIS (TGA) IS A TECHNIQUE IN WHICH THE MASS OF A SUBSTANCE IS MONITORED AS A FUNCTION OF TEMPERATURE OR TIME AS THE SAMPLE SPECIMEN IS SUBJECTED TO A CONTROLLED TEMPERATURE PROGRAM IN A CONTROLLED ATMOSPHERE.
2. TGA MEASURES A SAMPLE’S WEIGHT AS IT IS HEATED OR COOLED IN A FURNACE
3. THESE INSTRUMENTS CAN QUANTIFY LOSS OF WATER, LOSS OF SOLVENT, LOSS OF PLASTICIZER, DECARBOXYLATION, PYROLYSIS, OXIDATION, DECOMPOSITION, WEIGHT % FILLER, AMOUNT OF METALLIC CATALYTIC RESIDUE REMAINING ON CARBON NANOTUBES, AND WEIGHT % ASH.
General Specifications : TEMPERATURE RANGE: AMBIENT TO 1000°C
WEIGHING CAPACITY: 1.0 GM
SENSITIVITY: 0.1µG
WEIGHING PRECISION: +/- 0.01%
HEATING RATE - LOW MASS:
0.1 TO 100°C / MIN IN 0.01°C / MIN INCREMENTS
FURNACE COOLING: FORCED AIR 1000˚C TO 50˚C <12 MIN
SAMPLE PANS: PLATINUM
Capacity : 4 SAMPLES/DAY
AMBIENT - 600°C/SAMPLES"

PARTICLE SIZE ANALYZER (LASER DIFFRACTION)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : IS A TECHNIQUE USED TO OBTAIN INFORMATION ON THE SIZE AND DISTRIBUTION OF PARTICLES AND IS IMPORTANT FOR COLLOIDAL SYSTEMS. IT CAN ALSO BE USED TO PROVIDE INFORMATION ON STABILITY, IN THIS REGARD WITH SONICATION OR WITH TIME
General Specifications :
Capacity :

ELECTROANALYTICAL SYSTEM 2

Organisation : UNIVERSITY OF MALAYA (UM)
Function : MEASUREMENT OF ELECTROCHEMICAL IN ANALYTE
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

DNA ENGINE / PCR MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : INSTRUMENT THAT AMPLIFIES TARGET NUCLEIC ACID SEQUENCES INTO MILLIONS OF COPIES VIA POLYMERASE CHAIN REACTION
General Specifications :
Capacity :

PH METER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : 1. MONITORING LATEX STABILITY: NATURAL RUBBER LATEX IS A COLLOIDAL DISPERSION, AND ITS STABILITY IS HEAVILY INFLUENCED BY PH.
2. COAGULATION PROCESS CONTROL: THE PH OF LATEX NEEDS TO BE CAREFULLY CONTROLLED DURING THE COAGULATION PROCESS, WHERE RUBBER IS SEPARATED FROM THE LIQUID PHASE.
3. FORMULATION OF RUBBER COMPOUNDS: IN THE PREPARATION OF RUBBER COMPOUNDS, CERTAIN ADDITIVES AND FILLERS MAY ALTER THE PH OF THE MIXTURE.
General Specifications : LIQUID SAMPLES
Capacity : UP TO 50 SAMPLE/DAY

THERMAL GRAVIMETRIC ANALYZER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO ANALYZE MASS COMPOSITIONAL.
General Specifications : TEMPERATURE: RT TO 1000°C
Capacity : 20-50MG
3-4 SAMPLES /DAY (DEPENDS ON METHOD)

OVEN

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : 1. CURING AND VULCANIZATION: OVENS ARE USED TO CURE OR VULCANIZE RUBBER COMPOUNDS BY APPLYING CONTROLLED HEAT OVER A SPECIFIED PERIOD.
2. AGING AND DEGRADATION STUDIES: TO STUDY THE LONG-TERM STABILITY AND DURABILITY OF RUBBER MATERIALS, RESEARCHERS USE OVENS TO ACCELERATE THE AGING PROCESS.
3. DRYING: OVENS ARE USED TO DRY RUBBER SAMPLES, PARTICULARLY WHEN THEY CONTAIN SOLVENTS OR MOISTURE THAT NEEDS TO BE REMOVED BEFORE FURTHER PROCESSING OR TESTING.
General Specifications : ALL SAMPLES
Capacity : 5-10 SAMPLE/DAY

FIELD EMISSION SCANNING ELECTRON MICROSCOPE (FESEM), FEI, VERIOS 460L

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : THE MAIN FUNCTION OF SCANNING ELECTRON MICROSCOPE (SEM) IS TO DESCRIBE THE MORPHOLOGY OF MATERIALS.

WHEREAS FIELD EMISSION SCANNING ELECTRON MICROSCOPY (FE-SEM) IS AN ADVANCED TECHNOLOGY USED TO CAPTURE THE MICROSTRUCTURE IMAGE OF THE MATERIALS.

FE-SEM IS TYPICALLY PERFORMED IN A HIGH VACUUM BECAUSE GAS MOLECULES TEND TO DISTURB THE ELECTRON BEAM AND THE EMITTED SECONDARY AND BACKSCATTERED ELECTRONS USED FOR IMAGING
General Specifications : DETECTORS:
EVERHART-THORNLEY LOW ENERGY ELECTRON DETECTOR (EDT)
THROUGH-THE-LENS LOW ENERGY ELECTRON DETECTOR (TLD)
MIRROR (IN LENS) HIGH ENERGY ELECTRON DETECTOR (MD)
IN-COLUMN HIGH ENERGY ELECTRON DETECTOR (ICD)
CONCENTRIC (INSERTABLE) HIGHER ENERGY ELECTRON DETECTOR (CBS)
TRANSMISSION HIGH ENERGY ELECTRON DETECTOR (STEM)

ELECTRON LANDING ENERGY: 20EV - 30KEV

MAGNIFICATION: 40X UP TO 2MX

RESOLUTION(SE):
0.6 NM FROM 2 KV TO 30 KV
0.7 NM @ 1KV
1 NM @ 500

WORKING DISTANCE: 0.5 - 20MM FOCUSABLE

STAGE SPECIMEN: EUCENTRIC TILT: -10⁰ TO +60⁰,
ROTATE 360⁰
Capacity : FESEM IS CAPABLE OF OFFERING SUB-NANOMETER RESOLUTION OVER A WIDE ENERGY RANGE OF 0.5 - 30KV WITH A MAXIMUM 0.6 NM FROM 2KV TO 30KV

SAW MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : CUTS THE WORKPIECE UNIFORMLY.
General Specifications :
Capacity :

AUTOCLAVE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO DESTROY/KILL MICROORGANISMS AND DECONTAMINATE BIOHAZARDOUS WASTE AND MICROBIOLOGICAL CONTAMINANTS.
General Specifications : PRESSURE 1.5 BAR TEMP:121C
Capacity : 135 LITER

BIOHAZARD

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : A VENTILATION DEVICE THAT IS DESIGNED TO PROTECT USERS WHILE WORKING WITH BIOLOGICAL HAZARDS
General Specifications :
Capacity :

MIST ATOMIZER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : FOR SURFACE COATING FOR ULTRATHIN NANOMATERIAL DEPOSITION
General Specifications :
Capacity :

VARIABLE-PRESSURE SCANNING ELECTRON MICROSCOPE (VPSEM) WITH EDX

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : VPSEM - OBSERVED THE TOPOGRAPHY, MORPHOLOGY, AND COMPOSITION OF VARIOUS MATERIALS AT MICROSCALE LEVELS. HAVE VARIABLE PRESSURE FUNCTION, SUITABLE FOR NON-CONDUCTIVE SAMPLE.

EDX - DETECT ELEMENT IN THE SAMPLE. FROM BERYLIUM TO URANIUM
General Specifications : MAGNIFICATION - UP TO 20KX
TYPE OF SAMPLE - POWDER & SOLID (MUST IN DRY CONDITION)
Capacity : SAMPLE CRITERIA:
SOLID - MAX 3CM X 3CM
POWDER - 2G

PLASTOGRAPH/INTERVAL MIXER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : 1. MIXING AND COMPOUNDING: THE BRABENDER IS USED TO MIX RUBBER COMPOUNDS AND OTHER MATERIALS LIKE FILLERS, PLASTICIZERS, AND ADDITIVES.
2. RHEOLOGICAL TESTING: IT MEASURES THE TORQUE AND VISCOSITY OF RUBBER COMPOUNDS DURING MIXING, WHICH GIVES RESEARCHERS VALUABLE DATA ON THE FLOW PROPERTIES OF THE MATERIAL.
3. THERMAL ANALYSIS: THE BRABENDER CAN BE USED TO STUDY THE THERMAL BEHAVIOR OF RUBBER COMPOUNDS.
4. OPTIMIZATION OF FORMULATIONS: BY EXPERIMENTING WITH DIFFERENT FORMULATIONS AND PROCESSING CONDITIONS, RESEARCHERS CAN USE THE BRABENDER TO OPTIMIZE THE COMPOSITION OF RUBBER COMPOUNDS TO ACHIEVE DESIRED PROPERTIES LIKE STRENGTH, ELASTICITY, OR RESISTANCE TO WEAR AND TEAR.
General Specifications : PLASTIC OR RUBBER
Capacity : 5 SAMPLE/DAY

TENSILE STRENGTH INSTRUMENT

Organisation : TUNKU ABDUL RAHMAN UNIVERSITY OF MANAGEMENT AND TECHNOLOGY (TAR UMT)
Function : ELECTROMECHANICAL TEST SYSTEM THAT APPLIES A TENSILE (PULL) FORCE TO A MATERIAL TO DETERMINE THE TENSILE STRENGTH AND DEFORMATION BEHAVIOR UNTIL BREAK.
General Specifications : THE BASIC IDEA OF A TENSILE TEST IS TO PLACE A SAMPLE OF A MATERIAL BETWEEN TWO FIXTURES CALLED "GRIPS" WHICH CLAMP THE MATERIAL. THE MATERIAL HAS KNOWN DIMENSIONS, LIKE LENGTH AND CROSS-SECTIONAL AREA. WE THEN BEGIN TO APPLY WEIGHT TO THE MATERIAL GRIPPED AT ONE END WHILE THE OTHER END IS FIXED.
Capacity :

THERMOGRAVIMETRIC TG DTA

Organisation : UNIVERSITY OF MALAYA (UM)
Function : IDENTIFICATION OF PHYSICAL PROPERTIES AND THERMAL TRANSITIONS OF POLYMERIC SAMPLES
General Specifications : -
Capacity : RESEARCH

HIGH SPEED CENTRIFUGE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE BECKMAN COULTER AVANTI J-26S XPI CENTRIFUGE IS A REFRIGERATED CENTRIFUGE THAT IS IDEAL FOR A NUMBER OF APPLICATIONS INCLUDING BUT NOT LIMITED TO ROUTINE PROCESSING SUCH AS SAMPLE PREPARATIONS, PELLETING, EXTRACTIONS, PURIFICATIONS, CONCENTRATIONS, PHASE SEPARATIONS, AND SPIN COLUMN AND SPIN FILTER CENTRIFUGATION THE CENTRIFUGE CAN GENERATE UP TO 26,000 RPM AND 82,000 X G
General Specifications :
Capacity :

PSL-HUB/ SCANNING ELECTRON MICROSCOPE (SEM)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : THE JSM-5510LV JEOL SCANNING ELECTRON MICROSCOPE (SEM) PROVIDES HIGH-RESOLUTION IMAGING AND ANALYSIS OF SAMPLE SURFACES, OFFERING DETAILED TOPOGRAPHICAL, MORPHOLOGICAL, AND COMPOSITIONAL INFORMATION
General Specifications : THE JEOL JSM-5510LV SCANNING ELECTRON MICROSCOPE (SEM) FEATURES HIGH-RESOLUTION IMAGING, LOW-VACUUM MODE, SECONDARY ELECTRON DETECTOR, MAGNIFICATION UP TO 300,000X, AND A TUNGSTEN HAIRPIN FILAMENT.
Capacity : MAXIMUM SAMPLE SIZE: 150 MM IN DIAMETER
MAXIMUM SAMPLE HEIGHT: 48 MM

UV -VIS SPECTROPHOTOMETER

Organisation : UNIVERSITY OF MALAYA (UM)
Function : MEASURING THE AMOUNT OF LIGHT ABSORBED BY A CHEMICAL SUBSTANCES
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

FALLING HEAD PERMEABILITY APPARATUS

Organisation : UNIVERSITI MALAYSIA SARAWAK (UNIMAS)
Function : TO DETERMINE THE PERMEABILITY CHARACTERISTICS OF THE STABILIZED PEAT USING CEMENT, SAND AND RUBBER CRUMBS
General Specifications : BS1377: PART 5: 1990
Capacity : -

VARIOUS OF TESTING FACILITIES FOR RUBBER (SPECIALISED RUBBER PRODUCT TEST)

Organisation : MALAYSIAN RUBBER BOARD (MRB) (G-TACR)
Function : 1- BABY TEAT/PACIFIER
2- LATEX TREAD
3- BRIDGE BEARING
4- OTHER PRODUCTS
5- CARPERT UNDERLAY
6- RUBBER FOAM/MATTRESSES
7- CONDOMS
8- RUBBER HOSES
9- EXAMINATION GLOVES
10- RUBBER SEAL/GASKET
11- FENDERS 12- SEISMIC BEARING
13- GLOVES
14- SHOE 15- HOUSEHOLD INDUSTRIAL GLOVES
16- SQUASH BALL
17- LPG TUBING
18- SURGICAL GLOVE
General Specifications :
Capacity :

X-RAY DIFFRACTION (XRD) POWDER

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : ANALYZES THE CRYSTALLINE STRUCTURE AND DEGREE OF CRYSTALLINITY IN RUBBER.
General Specifications : POWER SAMPLE, PHASE ANALYSIS
Capacity : SAMPLE CHANGER 48 SAMPLES (1.5ML VIAL)

PILOT PLANT

Organisation : UNIVERSITY OF MALAYA (UM)
Function : PRODUCTION OF NANOMAG IRON OXIDE NANOPARTICLES
General Specifications : CO-PRECIPITATION REACTOR EQUIPEED WITH AMMONIA SCRUBBER FOR LARGE SCALE OF NANOMAG IRON OXIDE PRODUCTION
Capacity : 100 KG PER BATCH

HEADSPACE-GAS CHROMATOGRAPHY-FLAME IONIZATION DETECTOR (HS-GC-FID)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE LABORATORY IS ACCREDITED TO A RRIM STANDARD TEST METHOD TO DETERMINE THE LEVEL OF 2-CHLOROETHYLPHOSPHONIC ACID (CEPA) WHICH IS AN ACTIVE INGREDIENT IN PROLONGING THE LATEX FLOW IN HEVEA BRASILIENSE AS KEY FOR THE STIMULATION OF LATEX YIELD.
General Specifications :
Capacity :

ION CHROMATOGRAPHY (IC)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : IC IS MAINLY USED TO DETERMINE THE CONCENTRATION OF VARIOUS IONS PRESENT IN A SOLUTION. THE AVAILABLE IC TEST METHOD IS VALIDATED FOR DETERMINATION OF COMMON ANIONS (FLUORIDE, CHLORIDE, NITRITE, BROMIDE, NITRATE, SULPHATE AND PHOSPHATE) IN WATER, WASTEWATER, AND RUBBER EXTRACT SAMPLES. OTHER APPLICATIONS OF IC INCLUDES DETERMINATION OF OTHER IONIC COMPOSITION, QUALITY CONTROL, MIGRATION STUDIES IN FOOD CONTACT MATERIALS OR THE ANALYSIS OF EXTRACTABLES IN RUBBER AND RUBBER PRODUCTS.
General Specifications :
Capacity :

GAS CHROMATOGRAPHY - FLAME IONIZATION DETECTOR

Organisation : UNIVERSITI TEKNOLOGI PETRONAS (UTP)
Function : QUANTITATIVE ANALYSIS OF CHEMICAL COMPOUNDS IN LIQUID SAMPLES
General Specifications : AGILENT 7890A
Capacity : DETECTION OF BIODIESEL AND OTHER CHEMICAL COMPOUNDS PRESENT IN LIQUID SAMPLES

PARTICLE SIZE ANALYZER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : FOR THE DETERMINATION OF PARTICLE SIZE AND PARTICLE SIZE DISTRIBUTION OF LATEX AND DISPERSION
General Specifications :
Capacity :

UNIVERSAL TESTING MACHINE

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : TO TEST THE MECHANICAL PROPERTIES OF VARIOUS MATERIALS BY APPLYING CONTROLLED FORCES AND MEASURING THEIR RESPONSE, INCLUDING TENSION, COMPRESSION, BENDING, SHEAR, AND OTHER MECHANICAL TESTS.
General Specifications : -
Capacity : -

THERMOGRAVIMETRIC ANALYSIS (TGA)

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : 1. DETERMINING THERMAL STABILITY
2. COMPOSITION ANALYSIS
- DETERMINATION OF FILLER CONTENT
- PLASTICIZER AND ADDITIVE ANALYSIS
3. CROSS-LINKING DENSITY
- VULCANIZATION PROCESS: TGA CAN BE EMPLOYED TO MONITOR THE CROSS-LINKING PROCESS IN RUBBER VULCANIZATION.
4. DEGRADATION MECHANISM
General Specifications : PLASTIC OR RUBBER (SOLID & LIQUID SAMPLE)
Capacity : 2 SAMPLE/DAY

BENCHTOP AUTOCLAVE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO STERILIZE BOTTLED SOLUTIONS OR SMALL AUTOCLAVEBLE EQUIPMENTS
General Specifications :
Capacity :

LC-MS QTOF LIQUID CHROMATOGRAPHY HIGH RESOLUTION QTOF SYSTEM (LC-QTOF)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF COMPOUND FOR QUALITATIVE AND QUANTITATIVE ANALYSIS
General Specifications : -
Capacity : RESEARCH

FLUORESCENCE SPECTROMETER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO MEASURE THE QUALITY AND QUANTITY OF DNA OR RNA
General Specifications :
Capacity :

LCMS-QQQ TRIPLE QUADRUPOLE LC/MS SYSTEM

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF COMPOUND FOR QUALITATIVE AND QUANTITATIVE ANALYSIS
General Specifications : -
Capacity : RESEARCH

AUTOCLAVE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO DESTROY/KILL MICROORGANISMS AND DECONTAMINATE BIOHAZARDOUS WASTE AND MICROBIOLOGICAL CONTAMINANTS.
General Specifications : HTTPS://DRIVE.GOOGLE.COM/FILE/D/1OUDZTPWHJCX8QA5RTJR1YLMCVJPGQR-8/VIEW?USP=SHARING
Capacity : 50 LITER

PPMU / NUCLEAR MAGNETIC RESONANCE (NMR) SPECTROSCOPY

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : PROVIDES DETAILED INFORMATION ABOUT THE MOLECULAR STRUCTURE AND DYNAMICS OF RUBBER.
General Specifications : LIQUID, SOLID, POWDER (ANALYSIS AVAILABLE IN LIQUID AND SOLID FORM)
Capacity : 5-50MG

BENDING MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO SHAPE IRON MATERIALS AND PRODUCE INDENTATIONS ON THE WORK MATERIAL ACCORDING TO THE SIZE OF THE REQUIRED CURVE.
General Specifications :
Capacity :

RAMAN SPECTROMETER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : SPEKTROSKOPI RAMAN DIGUNAKAN DALAM SEBARANG APLIKASI YANG MEMERLUKAN ANALISIS DAN PENGIMEJAN YANG TIDAK MEROSAKKAN SAMPEL, MIKROSKOPIK, KIMIA SECARA DATA KUALITATIF ATAU KUANTITATIF.
General Specifications :
Capacity :

FLAME ATOMIC ABSORPTION SPECTROMETER (AAS)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : AAS IS A POWERFUL ANALYTICAL TECHNIQUE THAT HELPS TO DETERMINE THE CONCENTRATION OF SPECIFIC ELEMENTS IN VARIOUS SUBSTANCES. AAS CAN BE USED FOR QUALITY CONTROL PURPOSES, BY ACCURATELY QUANTIFYING TRACE METAL CONTAMINANTS IN RAW RUBBER, RUBBER COMPOUND, RUBBER PRODUCT, SOIL, PLANT, FERTILIZER, WATER, AND MANY OTHER TYPES OF SAMPLES. AAS IS AN ECONOMICAL TEST FOR ELEMENTAL ANALYSIS ESPECIALLY FOR ANALYZING ELEMENTS AT TRACE OR ULTRA-TRACE LEVELS.
General Specifications :
Capacity :

COMPRESSION MOULDING

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : UTILIZES HEAT AND PRESSURE TO SHAPE AND CURE MATERIALS, SUCH AS PLASTICS OR RUBBERS, INTO A SPECIFIC FORM WITHIN A CLOSED MOLD.
General Specifications : -
Capacity : -

WOOD CHIPPER MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : A MACHINE USED TO REDUCE WOOD (TREE TRUNKS, LIMBS) INTO SMALLER WOOD CHIPS.
General Specifications :
Capacity :

GC-FPD GAS CHROMATOGRAPHY FLAME PHOTOMETRIC DETECTOR

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF COMPOUND FOR QUALITATIVE AND QUANTITATIVE ANALYSIS
General Specifications : -
Capacity : RESEARCH

ELECTORSPUN

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : TO FABRICATE THE SCAFFOLDS FOR WOUND HEALING APPLICATIONS
General Specifications : ELECTROSPINNING WILL BE PERFORMED IN THE LABORATORY, WHICH WAS DESIGNED WITH A VERTICAL WORKING PRINCIPLE. EACH SOLUTION WILL BE PLACED IN A 5 ML SYRINGE AND SENT TO THE DRUM COLLECTOR (COVERED WITH ALUMINIUM FOIL) THROUGH A 20-GAUGE NOZZLE. THE POWER SUPPLY (AC) IS SET UP FOR A POSITIVE VOLTAGE OF 10 KV. THE FLOW RATE OF THE SOLUTION WILL ALSO BE DETERMINED BY SETTING UP THE SYRINGE PUMP AT 0.5 ML/H. THE ROTATIONAL SPEED OF THE DRUM COLLECTOR IS 2500 RPM, AND ITS DISTANCE IS SET TO 12 CM (OPTIMUM DISTANCE BASED ON PRELIMINARY TESTS) AWAY FROM THE NOZZLE. AT THE TIME OF THE EXPERIMENTS, RELATIVE HUMIDITY AND TEMPERATURE VALUES RANGED FROM 35% TO 42% RH AND 25 TO 35 °C, RESPECTIVELY.
Capacity : 8HRS/ BATCH

RESISTIVITY METER

Organisation : TUNKU ABDUL RAHMAN UNIVERSITY OF MANAGEMENT AND TECHNOLOGY (TAR UMT)
Function : STUDY SURFACE RESISTANCE
General Specifications : AN INSTRUMENT USED TO CARRY OUT RESISTIVITY SURVEYS THAT USUALLY HAS A CURRENT TRANSMITTER AND VOLTAGE-MEASURING CIRCUITRY. ELECTRODE. A CONDUCTOR PLANTED INTO THE GROUND THROUGH WHICH CURRENT IS PASSED, OR WHICH IS USED TO MEASURE THE VOLTAGE CAUSED BY THE CURRENT
Capacity :

VISCOMETER

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : VISCOMETER MEASURES FLUID VISCOSITY AT GIVEN SHEAR RATES.

VISCOSITY IS A MEASURE OF A FLUID'S RESISTANCE TO FLOW.
General Specifications : SPEEDS (RPM): 0.3, 0.5, 0.6, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 10, 12, 20, 30, 50, 60, 100

WEIGHT: GROSS -9KG, NET - 7.7KG

ACCURACY: ±1.0% FULL SCALE RANGE

REPRODUCIBILITY: 0.2% OF FULL SCALE RANGE
Capacity : ORQUE MEASUREMENT ACCURACY: 1% OF FULL SCALE RANGE ·

REPEATABILITY: 0.2% OF FULL SCALE RANGE ·

SURFACE ANALYZER

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : MEASURES THE SPECIFIC SURFACE AREA OF POROUS MATERIALS BY ANALYZING ADSORPTION OF GAS MOLECULES ONTO THE MATERIAL'S SURFACE, AIDING IN ASSESSING ITS POROSITY AND TEXTURE.
General Specifications : MICROMERITICS
Capacity : -

AUTOCLAVE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO DESTROY/KILL MICROORGANISMS AND DECONTAMINATE BIOHAZARDOUS WASTE AND MICROBIOLOGICAL CONTAMINANTS.
General Specifications : SX 700 : PRESSURE 0.1 MPA TEMP: 121 C
Capacity : 79 LITER

DYNAMIC CONTACT ANGLE

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : DYNAMIC CONTACT ANGLE MEASUREMENTS REFER TO TECHNIQUES THAT MEASURE THE CONTACT ANGLE DURING MOVEMENT.

THIS IS USUALLY ACCOMPLISHED BY ADDING LIQUID TO A STATIC DROPLET ON A SURFACE AND THUS PUSHING THE FRONT OF THE LIQUID ACROSS THE UNWETTED SURFACE
General Specifications : WEIGHING RANGE: 10UG - 210G

RESOLUTION/ACCURACY: 10UG/+/-20UG

SURFACE AND INTERFACIAL TENSION-MEASURING RANGE 1 TO 2000NN/M

TEMPERATURE MEASUREMENT AND RANGE: • -10 UP TO 130 °C (LIQUID TEMPERATURE CONTROL UNIT TV XX)
• ROOM TEMPERATURE … 250 °C; ± 0.2 K (TEMPERATURE CONTROL UNIT TEC 250/DCAT)
• 2 X PT100 INPUTS FOR -60 … +450 °C (PT100 OPTIONAL); 0.01 K RESOLUTION;

PRECISION 1/3 DIN IEC 751 (±0.03%), CLASS B

DIMENSIONS (L X W X H): • 360 X 230 X 565 MM3

WEIGHT: • 23 KG

POWER SUPPLY: • 100 … 240 VAC; 50 … 60 HZ; 70 W
Capacity : MEASURING RANGE FOR SURFACE AND INTERFACIAL TENSIONS: • 1 TO 2000 MN/M; ± 0.001 MN/M RESOLUTION
MEASURING RANGE FOR DYNAMIC CONTACT ANGLES: • 0 TO 180°; ± 0.01° RESOLUTION
MEASURING RANGE FOR DENSITIES: • 0.50 TO 2.50 G/CM3; ± 0.002 G/CM3 RESOLUTION

MEASURING VALUE RATE: • UP TO 50 WEIGHING VALUES PER SECOND

TRAVERSING RANGE AND SPEED OF SAMPLE TABLE: • 105 MM
• 46 NM/S TO 12 MM/S

TRAVEL RESOLUTION: • 24 NM

UNIVERSAL TESTING MACHINE 5582

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO MEASURE MECHANICAL PROPERTIES
General Specifications : 100KN CAPACITY, CAN MEASURE COMPOSITES/ REINFORCED PLASTICS MATERIAL IN COMPRESSION AND STRENGTH
Capacity : 30 SAMPLES/ DAY

ION CHROMATOGRAPHY

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION AND ANALYSIS OF ANIONS AND CATIONS
General Specifications : -
Capacity : RESEARCH

RHEOMETER (COLLOIDS)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE PROCESSING PARAMETERS, NAMELY FLOW AND VISCOELASTIC BEHAVIOUR OF DISPERSIONS, EMULSIONS AND LATEX SYSTEMS ARE PERFORMED USING A RHEOMETER
General Specifications :
Capacity :

MOONEY MACHINE

Organisation : NANOMALAYSIA BERHAD (NMB)
Function : TO MEASURE MOONEY VISCOSITY OF RUBBER
General Specifications : -
Capacity : -

PPMU / DIFFERENTIAL SCANNING CALORIMETRY (DSC)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : ANALYZES THE THERMAL PROPERTIES OF RUBBER, SUCH AS GLASS TRANSITION TEMPERATURE, MELTING POINT, AND CRYSTALLIZATION BEHAVIOR.
General Specifications : SOLID & LIQUID SAMPLE (TEMPERATURE -50 TO 300 DEG C)
Capacity : 10 MG (TEMPERATURE -50 TO 300 DEG C)

GC-ECD GAS CHROMATOGRAPHY ELECTRON CAPTURE DETECTOR

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF COMPOUND FOR QUALITATIVE AND QUANTITATIVE ANALYSIS
General Specifications : -
Capacity : RESEARCH

DENSITOMETER (2D GEL ANALYSIS)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE GS-900 CALIBRATED DENSITOMETER IS DESIGNED TO REPRODUCIBLY IMAGE GELS, BLOTS, AND FILM AND QUANTITATE PROTEINS ACROSS A WIDE DYNAMIC RANGE. THE GS-900 DENSITOMETRY SYSTEM USES TRANSMISSIVE AND REFLECTIVE IMAGING TO SCAN CHROMOGENIC SAMPLES AT THE OPTIMAL DETECTION WAVELENGTH
General Specifications :
Capacity :

TENSILE TESTING MACHINE-INSTRON 3382 UNIVERSAL TESTING MACHINE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : STATIC TESTING INVOLVES THE ASSESSMENT OF MATERIAL STRENGTH AND DEFORMATION PROPERTIES BY SUBJECTING THEM TO HIGH-CAPACITY FORCES, INCLUDING TENSILE, COMPRESSION, FLEXURAL, OR BENDING FORCES, WITH A MAXIMUM CAPACITY UP TO 100KN
General Specifications : 3382 (100KN)-MAXIMUM CAPACITY FOR TESTING.
Capacity : <100KN

CHNS

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATION OF ELEMENTAL COMPOSITION OF MATERIALS
General Specifications : -
Capacity : RESEARCH

TOTAL ORGANIC CARBON

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATION OF ELEMENTAL COMPOSITION OF MATERIALS
General Specifications : -
Capacity : RESEARCH

LIMITING OXYGEN INDEXER

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : THE LIMITING OXYGEN INDEX (LOI) IS THE EQUIPMENT USED TO MEASURE THE MINIMUM CONCENTRATION OF OXYGEN, EXPRESSED AS A PERCENTAGE, THAT WILL SUPPORT THE COMBUSTION OF A POLYMER.

IT IS MEASURED BY PASSING A MIXTURE OF OXYGEN AND NITROGEN OVER A BURNING SPECIMEN, AND REDUCING THE OXYGEN LEVEL UNTIL A CRITICAL LEVEL IS REACHED.
General Specifications : DIGITAL READOUT FOR OXYGEN CONCENTRATION: +/- 0.1%

DIMENSIONS (MM): 350(W) X 370(D) X 280(H)

COLUMN SIZE (MM): 75 & 100(DIA) X 450(H)

WEIGHT (KG): 14

VOLTAGE: 230V 50HZ 1A OR 110V 60HZ 2A

OPERATING MANUAL: SUPPLIED

OTHER SERVICE REQUIREMENTS: BOTTLED O2/N2, PROPANE
Capacity : PARAMAGNETIC OXYGEN ANALYZER FOR ASSESSING ACCURATE OXYGEN (± 0.1%) LEVELS.

MICROTOMES

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : IS A SECTIONING MACHINE THAT IS CAPABLE OF SLICING ULTRATHIN SPECIMEN FOR MICROSCOPY IMAGING PURPOSES
General Specifications :
Capacity :

PPMU-MJIIT/ GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : TO IDENTIFY THE MOLECULAR WEIGHT, ELEMENTAL CONSTITUTION, AND MOLECULAR STRUCTURE OF THE COMPOUNDS PRESENT IN THE SAMPLE
General Specifications : -
Capacity : -

I. TENSILE STRENGTH/ELONGATION TEST - INSTRON 5966 UNIVERSAL TESTING MACHINE II. LATEX PARTICLE SIZE ANALYSIS TEST - MALVERN ZETASIZER NANO ZS III. RHEOLOGICAL TEST OF RUBBER LATEX - ANTON PAAR MCR102 IV. GLOVE MORPHOLOGY ANALYSIS TEST – FESEM HITACHI SU8010 V. GLOVE FILM SURFACE PROPERTY ANALYSIS – AFM BRUKER MULTIMODE 8

Organisation : MONASH UNIVERSITY MALAYSIA (MONASH)
Function : INSTRON 5966 UNIVERSAL TESTING MACHINE
General Specifications : INSTRON 5966 UNIVERSAL TESTING MACHINE I.HTTPS://WWW.INSTRON.COM/-/MEDIA/LITERATURE-LIBRARY/PRODUCTS/2012/12/5900-SERIES-GENERAL-BROCHURE.PDF II.MALVERN ZETASIZER NANO ZS
HTTPS://WWW.MONASH.EDU.MY/ENGINEERING/ANALYTICAL-SERVICES/CHEMICAL-DEPARTMENT III. ANTON PAAR MCR102 HTTPS://WWW.MONASH.EDU.MY/ENGINEERING/ANALYTICAL-SERVICES/CHEMICAL-DEPARTMENT IV.FESEM HITACHI SU8010
HTTPS://WWW.MONASH.EDU.MY/ENGINEERING/RESEARCH/RESEARCH-INFRASTRUCTURE/NANO-ANALYTICAL-PLATFORM/ULTRA-HIGH-RESOLUTION-FE-SEM V. AFM BRUKER MULTIMODE 8
HTTPS://WWW.MONASH.EDU.MY/ENGINEERING/RESEARCH/RESEARCH-INFRASTRUCTURE/NANO-ANALYTICAL-PLATFORM/AFM
Capacity : -

GROWTH / HUMIDITY CHAMBER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO MANIPULATE THE TEMPERATURE CONDITIONS OF AN ENCLOSED SPACE TO RUN CONTROLLED TESTS.
General Specifications :
Capacity :

VARIOUS TESTING FACILITIES FOR CONSTRUCTION MATERIALS

Organisation : UNIVERSITI TEKNOLOGI PETRONAS (UTP)
Function : DIFFERENT, PHYSICAL, MECHANICAL AND CHEMICALS TESTING
General Specifications : WIDE RANGE OF SPECIFICATIONS ARE AVAILABLE
Capacity : DIFFERENT TESTING CAPACITIES ARE AVAILABLE

INDICATOR

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : FOR MEASURING SHORT, LINEAR DISTANCES IN MECHANICAL ENGINEERING, MACHINING, AND MANUFACTURING APPLICATIONS.
General Specifications :
Capacity :

AIR COMPRESSOR

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO SUPPLY AIR PRESSURE TO MACHINES THAT NEED IT.
General Specifications :
Capacity :

FT-IR IMAGING

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE THERMOFISHER/NICOLET IN10 INFRARED IMAGING MICROSCOPE CAN QUICKLY ANALYZE LARGE SAMPLE AREAS TO EXTRACT CHEMICAL AND PHYSICAL INFORMATION. THE AUXILIARY IZ10 PROVIDES FULLY FUNCTIONAL SECOND SAMPLE COMPARTMENT FOR OUR QC LABORATORY AS THE MODULE PASSES THE SAME ASTM-DESIGNED REQUISITE TESTING PROTOCOLS PROVIDED BY THE AUTOMATIC PERFORMANCE VERIFICATION WHEEL.
General Specifications :
Capacity :

ROTARY EVAPORATOR BUCHI

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : ROTAVAPOR® IS USED FOR FAST DISTILLATION OF MIXED SOLVENTS, EFFICIENT DRYING OF SAMPLES, QUICKER FREEZE-DRYING SAMPLE PREPARATION, CHEMICAL SYNTHESIS UNDER REFLUX, EXTRACTION OF NATURAL COMPOUNDS AND CONCENTRATION. THE ROTARY EVAPORATOR SYSTEM COMPRISES OF ROTARY EVAPORATOR, GLASSWARE AND VACUUM PUMP.
General Specifications :
Capacity :

NITROGEN ANALYZER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE LABORATORY HOUSES ONE UNIT LECO MODEL FP628 ELEMENTAL ANALYSIS BY COMBUSTION CAPABLE TO DETERMINE NITROGEN (INDIRECTLY PROTEIN) IN SOLID OR LIQUID MICRO SAMPLES.
General Specifications :
Capacity :

ELECTRICAL CONDUCTIVITY METER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : SEPARATE PROTEINS IN A MIXTURE (MOSTLY PEPTIDES, PROTEINS, AND DIFFERENT AMINO ACID SEQUENCES) BASED ON THEIR PI VALUES IN A PH GRADIENT GEL MATRIX IN THE PRESENCE OF AN ELECTRIC FIELD
General Specifications :
Capacity :

FTIR SPECTROMETER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : AN ANALYTICAL TECHNIQUE FOR IDENTIFYING CHEMICAL COMPOUNDS. INFRARED SPECTRUM REPRESENTS A FINGERPRINT OF A SAMPLE WITH ABSORPTION PEAKS THAT CORRESPOND TO THE FREQUENCIES OF VIBRATIONS BETWEEN THE BONDS OF THE ATOMS MAKING UP THE MATERIAL
General Specifications :
Capacity :

HPLC AUTOPURIFIED

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF COMPOUND FOR QUALITATIVE AND QUANTITATIVE ANALYSIS
General Specifications : -
Capacity : RESEARCH

HYDRAULIC PRESS MACHINE

Organisation : TAYLOR'S UNIVERSITY (TAYLORS)
Function : HOT PRESS MATERIALS INTO SHEETS OF VARIOUS THICKNESS
General Specifications : GOTECH GT 7014-P
Capacity : UP TO 300 DEGC
300 X 300 MM
VARIOUS THICKNESSES E.G. 1MM, 2MM

THERMOGRAVIMETRY-GAS CHROMATOGRAPHY-MASS SPECTROMETRY (TGA-GCMS)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : IN HYPHENATION MODE, THE SYSTEM IS CAPABLE OF DETECTING, SEPARATING AND ANALYZING VOLATILE AND SEMI-VOLATILE COMPOUNDS WITH HELIUM AS THE MOBILE/PURGE GAS.
General Specifications :
Capacity :

ULTRA HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (UHPLC)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : UHPLC IS USED PREDOMINATELY TO IDENTIFY, QUANTIFY AND SEPARATE COMPONENTS OF A MIXTURE BY USING HIGH PRESSURE TO PUSH SOLVENTS THROUGH THE COLUMN. HPLC IS USED TO ANALYZE AND DEVELOP ANALYTICAL METHODS FOR THE DETERMINATION OF RUBBER ACCELERATORS PARTICULARLY BHA, BHT, DPT, MBT, TMTD, ZDBC, ZDEC, ZDMC, ZMBI, ZMBT, AND ZPMC.
General Specifications :
Capacity :

OPTICAL MICROSCOPE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : OFTEN USED TO PROVIDE SUPPORTING INFORMATION ON THE STRUCTURE AND STABILITY OF LATEXES, DISPERSIONS AND EMULSIONS. APART FROM THAT, IT CAN ALSO BE USED TO PROVIDE INFORMATION ON THE PHYSICAL APPEARANCE AND DEFECTS OF PRODUCTS, SUCH AS DIPPED GOODS, COATINGS AND LAMINATES
General Specifications :
Capacity :

PPMU /ATOMIC FORCE MICROSCOPE (AFM)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : PROVIDES HIGH-RESOLUTION IMAGING OF THE RUBBER SURFACE AT THE NANOSCALE.
General Specifications : SOLID SAMPLE, SURFACE ROUGHNESS
Capacity : MAX SCAN SIZE 100X100 MICROMETER, MAX THICKNESS 3MM)

DUROMETER HARDNESS

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : TO DETERMINE THE HARDNESS OR RESISTANCE OF A MATERIAL, TYPICALLY RUBBER OR PLASTIC, BY ASSESSING ITS INDENTATION DEPTH UNDER A SPECIFIC FORCE USING A DUROMETER INSTRUMENT
General Specifications : -
Capacity : -

VOLTAGE STABILIZER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : CONTROLLING THE ELECTRIC CURRENT ENTERING THE MACHINE (TO GET A MORE CONSISTENT ELECTRIC CURRENT READING).
General Specifications :
Capacity :

ENERGY DISPERSIVE X-RAY (EDX)

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO DETERMINE THE ELEMENTAL COMPOSITION OF INDIVIDUAL POINTS OR TO MAP OUT THE LATERAL DISTRIBUTION OF ELEMENTS FROM THE IMAGED AREA. EDX IS COMBINED WITH FESEM ABLE TO PROVIDE ELEMENTAL ANALYSIS ON AREAS AS SMALL AS NANOMETERS IN DIAMETER.
General Specifications : DETECTION OF ELEMENTS OF BERYLLIUM TO URANIUM PERIODIC TABLE FOR SOLID MATERIALS
Capacity : 20 SAMPLES/DAY

SHEARS MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : CUTTING THIN METAL SHEETS ACCORDING TO THE THICKNESS DETERMINED BY THE MACHINE.
General Specifications :
Capacity :

DISCOVERY DSC 25 (DIFFERENTIAL SCANNING CALORIMETRY)

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : DSC IS A THERMAL ANALYSIS APPARATUS MEASURING HOW THE PHYSICAL PROPERTIES OF A SAMPLE CHANGE, ALONG WITH TEMPERATURE AGAINST TIME.
General Specifications : THE BASELINE REPEATABILITY (-50 TO 300⁰C) LESS THAN 40UW

TEMPERATURE RANGE IS BETWEEN -180⁰C TO 725⁰C

TEMPERATURE ACCURACY IS +/- 0.1⁰C

TEMPERATURE PRECISION IS +/- 0.01⁰C

ENTHALPY PRECISION IS +/-0.1%
Capacity : DISCOVERY DSC 25 IS EQUIPPED WITH THE LN PUMP THAT PROVIDES THE HIGHEST PERFORMANCE AND GREATEST FLEXIBILITY IN COOLING FOR THE DISCOVERY DSC

IT FACILITATES THE LOWEST OPERATIONAL TEMPERATURE UP TO -180⁰C

THE GREATEST COOLING RATE CAPACITY IS UP TO 140⁰C/MIN

THE FASTEST SUB-AMBIENT EQUILIBRATION TIMES, AND AN UPPER TEMPERATURE LIMIT OF 550⁰C

MAKMAL PERKHIDMATAN PPMU-MJIIT/ THERMOGRAVIMETRIC ANALYSIS (TGA)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : THERMAL ANALYSIS IN WHICH THE MASS OF A SAMPLE IS MEASURED OVER THE TIME AS TEMPERATURE CHANGES.
General Specifications : SOLID, LIQUID AND POWDER SAMPLE.
TEMPERATURE RANGE: AMBIENT TO 1000 DEG.
Capacity : 5-10 MG SAMPLE CAPACITY

FATIGUE TESTING MACHINE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : A TESTING PROCEDURES TO MEASURE THE FATIGUE PROPERTIES OF NOMINALLY HOMOGENEOUS MATERIALS BY SUBJECTION TO UNIAXIAL FORCES. ASTM E606 IS INTENDED AS A GUIDE FOR FATIGUE TESTING PERFORMED AT LOW AND HIGH CYCLES. RESULTS CAN SUPPORT SUCH ACTIVITIES AS MATERIALS RESEARCH AND DEVELOPMENT, MECHANICAL DESIGN, PROCESS AND QUALITY CONTROL, PRODUCT PERFORMANCE, AND FAILURE ANALYSIS.
General Specifications : 20200824140309STATUS_ALAT-2019-KAA-FATIGUE_TESTING-8.PDF (UPM.EDU.MY)
Capacity : 20200824140309STATUS_ALAT-2019-KAA-FATIGUE_TESTING-8.PDF (UPM.EDU.MY)

MELT FLOW INDEX

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE MFI TESTER OR MELT FLOW INDEX TESTER (MFI) IS USED TO MEASURE THE RESISTANCE TO THE FLOW OF MATERIALS LIKE POLYMER THAT MELTS AT A CERTAIN TEMPERATURE.
General Specifications :
Capacity :

CHEMICAL MIXER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO MIX SMALL SAMPLES OF LIQUIDS IN SMALL VIALS/TUBES RAPIDLY
General Specifications :
Capacity :

TGA-GCMS THERMOGRAVIMETRIC ANALYSIS

Organisation : UNIVERSITY OF MALAYA (UM)
Function : QUALITATIVE AND QUANTITATIVE MOLECULAR ANALYSIS OF GASEOUS DECOMPOSITION SAMPLES
General Specifications : -
Capacity : RESEARCH

UNIVERSAL TESTING MACHINE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO PERFORM TENSILE, COMPRESSION, AND FLEXURAL TESTING OF MATERIAL.
General Specifications : LOAD CELL CAPACITY:
1) 1KN
2) 10 KN
Capacity : 10 SET/DAY

LAB CENTRIFUGE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THIS IS A LAB SCALE EQUIPMENT FOR INTERNAL RND ACTIVITIES. PLEASE REMOVE IT FROM THE LIST.
General Specifications :
Capacity :

JACK

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO LIFT A MATERIAL AT THE REQUIRED HEIGHT.
General Specifications :
Capacity :

FOCUS ON QUALITY AND PRODUCTIVITY ANALYSIS (AUTOMATION, ROBOTICS, INDUSTRY 4.0 APPLICATION)

Organisation : MONASH UNIVERSITY MALAYSIA (MONASH)
Function : BASED ON PROBLEM OR ISSUE IN RUBBER INDUSTRIES (QUALITY, PRODUCTIVITY, AUTOMATION)

1. QUALITY ISSUES (ROOT CAUSE ANALYSIS, SOLUTION, DMAIC REPORT, YIELD IMPROVEMENT ETC)

2. PRODUCTIVITY (SIMULATION, BOTTLE NECK ANALYSIS, SOLUTION)

3. AUTOMATION
A) IMPROVE QUALITY AND PRODUCTIVITY
B) INTEGRATE THE AUTOMATION AND ROBOTICS WITH IOT, LIVE DATA MONITORING, AI
C) SMART MAINTENANCE SYSTEM - PREDICTIVE ON MACHINE STOPPAGE, SCHEDULE PM, LIFE CYCLE ETC

4. PERFORM PROCESS OPTIMIZATION E.G PARAMETERS OPTIMIZATION USING DOE METHOD - STATISTICAL SOFTWARE USED IS JMP, LAYOUT OPTIMIZATION ETC
General Specifications : REQUIREMENT
1. ANY ISSUE/PROBLEM RELATED TO RUBBER INDUSTRIES TO BE SOLVED

2. A PROBLEM THAT REQUIRES ROOT CAUSE AND SOLUTION BASED ON MAN, METHOD, MACHINE, MATERIAL AND ENVIRONMENT

3. AUTOMATION OR ROBOTIC SYSTEM THAT REQUIRES IR4 ELEMENTS E.G BIG DATA, IOT ETC

WHAT WE OFFER:
1. PROBLEM ANALYSIS WITH PRACTICAL SOLUTION - YIELD IMPROVEMENT, QUALITY, PRODUCTIVITY

2. LEAN SIX SIGMA GREEN BELT - PROCESS VISUALIZATION, ANALYTICAL ANALYSIS TO A PROBLEM

3. INTEGRATION AUTOMATION AND ROBOTICS WITH IR4 ELEMENTS - IOT, LIVE DATA MONITORING, SMART MAINTENANCE SYSTEM, SMART SCHEDULING SYSTEM, ETC

4. OPTIMIZE A PROCESS - E.G PARAMETERS, LAYOUT ETC
Capacity : 1. A COMPUTER WITH SIMULATION SOFTWARE ON THE MANUFACTURING SYSTEM

2. EXPERIENCED IN PROBLEM-SOLVING WITH INDUSTRIES PROBLEMS (POLYMER KEYPAD PRODUCTION, ASSEMBLY SEMICONDUCTOR)

3. EXPERIENCED IN THE INDUSTRIES PROCESSES (INJECTION MOLDING, PRINTING, HOT STAMPING, REFLOW OVEN, SAWING, MOUNTING, DIE ATTACH, WIRE BOND, 3RD OPTICAL INSPECTION - WITH THE SEMI-AUTOMATIC PROCESS, GEL COATING, LID ATTACH, OVEN CURE)

4. TRAINED WITH THE PROBLEM-SOLVING TOOL AND LEAN SIX SIGMA GREEN BELT IN ACTUAL INDUSTRIES PRACTICES (17 YEARS OF EXPERIENCE IN INDUSTRIES)

5. EQUIPPED WITH THE STATISTICAL TOOL IN PROCESS OPTIMIZATION (STATISTICAL SOFTWARE = JMP), LAYOUT OPTIMIZATION

ST PRESS 400T AND 600T

Organisation : NANOMALAYSIA BERHAD (NMB)
Function : ST PRESS IS MAINLY USED FOR THE REPLACEMENT AND INSTALLATION OF SOLID TIRES TO THE MOLD WITH MAXIMUM PRESS OF 400/600 TONNE.
General Specifications : -
Capacity : 400T AND 600T

ULTRAVOILET / VISIBLE SPECTROPHOTOMETER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : FOR MEASUREMENT OF LIGHT INTENSITY PASSING THROUGH A SAMPLE SOLUTION.
General Specifications :
Capacity :

DIFFERENTIAL SCANNING CALORIMETRY (DSC) WITH RCS

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : 1. MEASURE THE AMOUNT OF HEAT RELEASED OR ABSORBED BY A SAMPLE DURING HEATING OR COOLING OVER A RANGE OF TEMPERATURE.
2. DETERMINE MATERIAL THERMAL TRANSITION POINTS, INCLUDING THE GLASS TRANSITION, CRYSTALLIZATION AND MELTING TEMPERATURES.
General Specifications : TEMPERATURE RANGE: AMBIENT TO 725 ˚C
SENSITIVITY: 1.0 μW
TEMPERATURE ACCURACY: +/- 0.1 ˚C
COOLING FEATURE: AVAILABLE WITH RCS90 (SUB-AMBIENT FROM -90 ˚C)
Capacity : 2-4 SAMPLES/DAY

THIN-LAYER CHROMATOGRAPHY (TLC)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TLC IS A CHROMATOGRAPHIC TECHNIQUE USED TO SEPARATE THE COMPONENTS OF A MIXTURE USING A THIN STATIONARY PHASE SUPPORTED BY AN INERT BACKING. THIS IS A VERY EASY WAY TO SEPARATE THE COMPONENTS BECAUSE OF ITS SIMPLICITY, HIGH SENSITIVITY, SPEED OF SEPARATION AND RELATIVELY LOW COST. IT IS USED MAINLY FOR THE IDENTIFICATION OF ACCELERATORS AND ANTIOXIDANTS USED IN THE RUBBER AND RUBBER RELATED PRODUCT BY COMPARING THE RETENTION TIME OF THE SAMPLE TO THE RETENTION TIME OF THE STANDARD.
General Specifications :
Capacity :

DIFFERENTIAL SCANNING CALORIMETER (DSC)

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : 1. DETERMINATION OF GLASS TRANSITION TEMPERATURE (TG)
2. CRYSTALLIZATION AND MELTING BEHAVIOR
3. CURE MONITORING
4. THERMAL STABILITY
5. POLYMER BLENDS AND COMPATIBILITY
6. EFFECT OF AGING
General Specifications : PLASTIC OR RUBBER (SOLID & LIQUID SAMPLE)
Capacity : 3 SAMPLE/DAY

DYNAMIC MECHANICAL ANALYSIS (DMA)

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : MEASURES HOW A MATERIAL'S MECHANICAL PROPERTIES CHANGE IN RESPONSE TO VARYING TEMPERATURE, FREQUENCY, AND FORCE CONDITIONS.
General Specifications : TA INSTRUMENT
Capacity : -

FT-NMR ADVANCE 600MHZ

Organisation : UNIVERSITY OF MALAYA (UM)
Function : ELUCIDATION OF COMPOUND
General Specifications : -
Capacity : RESEARCH

AUTOCLAVE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO DESTROY/KILL MICROORGANISMS AND DECONTAMINATE BIOHAZARDOUS WASTE AND MICROBIOLOGICAL CONTAMINANTS.
General Specifications : SX500 : 0.1 MPA TEMP 121C
Capacity : 58 LITER

400 SPOTLIGHT WITH ATR-FTIR IMAGING SYSTEM

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : FOURIER TRANSFORM INFRARED SPECTROSCOPY (FTIR) IDENTIFIES CHEMICAL BONDS IN A MOLECULE BY PRODUCING AN INFRARED ABSORPTION SPECTRUM. THE SPECTRA PRODUCE A PROFILE OF THE SAMPLE, A DISTINCTIVE MOLECULAR FINGERPRINT THAT CAN BE USED TO SCREEN AND SCAN SAMPLES FOR MANY DIFFERENT COMPONENTS.

THE SPOTLIGHT 400 FT-IR IMAGING SYSTEM COMBINES HIGH SENSITIVITY AND RAPID IMAGING WITH EASE OF USE. THE ABILITY TO IMAGE LARGE SAMPLE AREAS RAPIDLY AT HIGH SPATIAL RESOLUTION EXTENDS FT-IR MICROSCOPY INTO NEW APPLICATIONS.
General Specifications : HIGH-QUALITY SPECTRAL PRODUCTION AND IMAGES FROM SAMPLE AREAS, YIELDING PIXEL RESOLUTIONS OF 6.25, 25, OR 50 MICRONS

REGION OF INTEREST (ROI) FINDING TO ALLOW FOR EASE OF ANALYSIS OF MULTIPLE PARTICLES AND LAYERS ALL AT ONCE

CONFIGURABILITY TO BE USED WITH EXTENDED RANGE MID-IR, NEAR-IR OR DUAL RANGE FT-IR WITH THE SPECTRUM 3™ SYSTEM TO GIVE MAXIMUM INFORMATION FROM SAMPLES IN THE SHORTEST POSSIBLE TIME.

CONFIGURABILITY TO BE USED WITH MID-IR, NEAR-IR, OR DUAL RANGE FT-IR WITH THE SPECTRUM 3™ SYSTEMS TO GIVE MAXIMUM INFORMATION FROM SAMPLES IN THE SHORTEST POSSIBLE TIME.

HTTPS://WWW.PERKINELMER.COM/PRODUCT/SPOTLIGHT-400-SP3-STD-LD-L1860816
Capacity : IT CAN MEASURE SAMPLE DIAMETERS UP TO 500U (OPTIONALLY UP TO 1200U) AT A SINGLE SAMPLE CONTACT POINT.

IT PROVIDES UP TO 400 TIMES LARGER IMAGES THAN CAN BE ACHIEVED BY OTHER SYSTEMS BASED ON CA 50U ATR TIP SIZE - AND WITHOUT REPOSITIONING AND 'STITCHING' TOGETHER INDIVIDUAL IMAGES"

AKRON ABRASION TESTER

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : TO EVALUATE THE ABRASION RESISTANCE OF RUBBER COMPOUNDS BY SUBJECTING THEM TO RUBBING AND WEARING ACTION AGAINST AN ABRASIVE SURFACE, MEASURING THE RESULTING LOSS IN MATERIAL WEIGHT OR CHANGES IN PHYSICAL PROPERTIES.
General Specifications : -
Capacity : -

FIELD EMISSION SCANNING ELECTRON MICROSCOPE (FESEM)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : FESEM EQUIPPED WITH EDX PROVIDES SURFACE MORPHOLOGY INFORMATION BY SCANNING THE SURFACE OF A SAMPLE WITH A FOCUSED ELECTRON BEAM (FIELD EMISSION SOURCE) WHICH CAN BE USED TO STUDY VARIOUS SAMPLES INCLUDING CHEMICALS, LATEX, RAW RUBBER, RUBBER COMPOUND, RUBBER PRODUCTS, LEAVES, TREE BARK, ETC. IT IS WIDELY USED FOR DETERMINATION OF PARTICLE SHAPE, SIZE (DIAMETERS OR LENGTH), DISTRIBUTION OF FILLER, OBSERVATION OF FUNGUS, IDENTIFICATION OF ELEMENT AS WELL AS QUANTITATIVE COMPOSITIONAL INFORMATION.
General Specifications :
Capacity :

DIFFERENTIAL SCANNING CALORIMETER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : ANALYSIS OF:
1. GLASS TRANSITION
2. MELTING POINT
3. CRYSTALINITY
4. SPECIFIC HEAT
General Specifications : TEMPERATURE: -90°C TO 600°C
Capacity : 20-50MG
UP TO 8 SAMPLES /DAY (DEPENDS ON METHOD)

GC-MS

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF COMPOUND FOR QUALITATIVE AND QUANTITATIVE ANALYSIS
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

RESISTANCE OHM METER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : MENGUJI RINTANGAN ELETERIK BAGI SESUATU ELETERIK
General Specifications :
Capacity :

TRANSMISSION ELECTRON MICROSCOPE (TEM)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : IN TRANSMISSION ELECTRON MICROSCOPY (TEM), ELECTRONS PASS THROUGH THE SAMPLE AND ILLUMINATE FILM OR A DIGITAL CAMERA. ELECTRON DENSE MATERIAL IN THE SAMPLE CASTS SHADOWS ON THE CAMERA FACE AND THEREBY PRODUCES A TWO-DIMENSIONAL PROJECTION OF MATERIAL IN THE SECTION
General Specifications :
Capacity :

400T AND 600T PRESS LIFT

Organisation : NANOMALAYSIA BERHAD (NMB)
Function : HELP IN THE SEPARATION OF THE TIRE FROM THE MOLD. THIS ENSURES THE NEW TIRE IS PERFECTLY ATTACHED TO THE MOLD BEFORE BEING PRESSED.
General Specifications : -
Capacity : 400T AND 600T

HIGH-PRESSURE VOLUMETRIC ANALYZER (HPVA II)

Organisation : UNIVERSITI TEKNOLOGI PETRONAS (UTP)
Function : BATCH CO2 ADSORPTION INVESTIGATION FOR BIOMASS BASED ACTIVATED CARBON (AC)
General Specifications : MICROMERTICS ASAP 2020
Capacity : VARIATION OF T & P; CAN USE FOR OTHER TYPE OF GASSES

PPMU-MJIIT/ DIFFERENTIAL SCANNING CALORIMETRY (DSC)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : ANALYSING THE THERMAL PROPERTIES OF SAMPLE SUCH AS GLASS TRANSITION TEMPERATURE (TG), MELTING TEMPERATURE (TM), AND CRYSTALLIZATION (TM)
General Specifications : SOLID AND POWDER SAMPLE.
TEMPERATURE RANGE: AMBIENT TO 300 DEG.
Capacity : 10 MG SAMPLE CAPACITY (AMBIENT TO 300 DEG.)

TWO-ROLL MILL

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : TO MIX, REFINE, AND HOMOGENIZE MATERIALS BY PASSING THEM THROUGH TWO ROTATING ROLLS.
General Specifications :
Capacity :

EXTRUDER MACHINE

Organisation : NANOMALAYSIA BERHAD (NMB)
Function : TO PRODUCE LONG CONTINUOUS PRODUCTS WHICH IS TIRE TREADS
General Specifications : -
Capacity : -

LAB STIRRER / OVERHEAD STIRRER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : FOR HOMOGENIZING, MIXING, AND RECIRCULATING HIGH-VISCOSITY SUBSTANCES OR LARGE VOLUMES.
General Specifications :
Capacity :

TENSILE TESTING MACHINE-INSTRON 5565 UNIVERSAL TESTING MACHINE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : STATIC TESTING INVOLVES SUBJECTING MATERIALS OR OBJECTS TO TENSILE AND COMPRESSIVE FORCES WITH A MAXIMUM CAPACITY OF LESS THAN 5 KN TO ASSESS THEIR STRENGTH AND DEFORMATION CHARACTERISTICS.
General Specifications : TENSION TESTING OPENING (LESS TOOLING): 51" COMPRESSION TESTING OPENING (LESS TOOLING): 51" DISTANCE BETWEEN COLUMNS/SCREWS: 16.5" TESTING STROKE: 51" TABLE SIZE (W X D): 16" X 6" TESTING SPEED (IPM AT FULL LOAD): 0.0004 - 40 CROSSHEAD ADJUSTING SPEED (IPM): 48 APPROXIMATE OVERALL DIMENSIONS: LOAD FRAME (W X D X H): 36" X 30" X 63" WEIGHT (LBS.): 400 ELECTRICAL REQUIREMENTS (V,HZ,PH): 100/120/230/240, 60, 1
Capacity : <5KN

PERISTALTIC PUMP

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TRANSPORT FLUID THROUGH A HOSE THAT IS CONTINUOUSLY COMPRESSED BY A SET OF ROTATING ROLLERS TO PREVENT CROSS CONTAMINATION.
General Specifications :
Capacity :

REFRIGERATED CENTRIFUGE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO CENTRIFUGE SAMPLES IN COLD CONDITIONS
General Specifications :
Capacity :

PH METER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO MEASURE PH OF SOLUTIONS PREPARED IN THE LAB.
General Specifications :
Capacity :

GAS CHROMATOGRAPHY NITROGEN CHEMILUMINESCENCE DETECTOR (GC-NCD)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE DETERMINATION OF NITROSAMINE IMPURITIES IN RUBBER PRODUCTS AS PER TEST METHOD ISO 29941 AND EN 12868 IS OFFERED WITH NITROGEN CHEMILUMINESCENCE AS THE DETECTOR WITH INSTRUMENT DETECTION LIMIT (IDL) OF 2 NG/G.
General Specifications :
Capacity :

THERMAL GRAVIMETRIC ANALYZER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : MEASURE CHANGES IN SAMPLE MASS AS A FUNCTION OF TEMPERATURE WITH HIGH LEVELS OF SENSITIVITY
General Specifications : MAXIMUM TEMPERATURE 25C -800C
Capacity : 7-20MG

SUPERCRITICAL FLUID EXTRACTOR

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : AN INSTRUMENT THAT IS USED FOR FOR EXTRACTING BIOACTIVE COMPOUNDS UTILIZING THE UNIQUE PROPERTIES OF SUPERCRITICAL FLUID SUCH AS CARBON DIOXIDE.
General Specifications :
Capacity :

FLAME ATOMIC ABSORPTION SPECTROMETER (AAS)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATION OF ELEMENTAL COMPOSITION OF MATERIALS
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

WOOD CUTTING MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO CUT TREE LOGS
General Specifications :
Capacity :

MULTI-CELL DIFFERENTIAL SCANNING CALORIMETER (MDCSC)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : IDENTIFICATION OF PHYSICAL PROPERTIES AND THERMAL TRANSITIONS OF POLYMERIC SAMPLES
General Specifications : -
Capacity : RESEARCH

WEATHERING CLIMATE CHAMBER

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : A WEATHERING CHAMBER IS A TYPE OF ENVIRONMENTAL OR CLIMATE CHAMBER THAT SIMULATES ACCELERATED WEATHERING CONDITIONS ON A MATERIAL OR OBJECT IN ORDER TO TEST THAT ITEM'S ABILITY TO WITHSTAND WEATHERING.

IT IS AN ENCLOSURE USED TO TEST THE EFFECTS OF SPECIFIED ENVIRONMENTAL CONDITIONS ON BIOLOGICAL ITEMS, INDUSTRIAL PRODUCTS, MATERIALS, AND ELECTRONIC DEVICES AND COMPONENTS.
General Specifications : SPECIMEN ORIENTATION IS 75⁰ FROM THE HORIZONTAL

8 UV FLUORESCENT LAMPS@40W

THE ONBOARD IRRADIANCE SENSOR IS NARROWBAND AT 254 NM

THE TEMPERATURE OF THE WATER CAN BE CONTROLLED UP TO 60 °C

INLET WATER PRESSURE IS 0.2-5.5 BAR (2-80 PSI).

THE WEIGHT IS 136KG WITH DIMENSIONS OF 137X135X53 CM

THE POWER REQUIREMENT IS 230V
Capacity : THE QUV TESTER CONVENIENTLY ACCOMMODATES UP TO 48 SPECIMENS (75MM × 150MM) AND COMPLIES WITH A WIDE RANGE OF INTERNATIONAL, NATIONAL, AND INDUSTRY SPECIFICATIONS, ENSURING THE RELIABILITY AND REPRODUCIBILITY OF YOUR TEST PROGRAM

VISCOMETER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO MEASURE VISCOSITY OF LIQUID
General Specifications : ALL LIQUID MATERIALS FROM LOW TO HIGHLY VISCOSE
Capacity : 30 SAMPLES/ DAY

UV CHAMBER

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : UV CHAMBER IS AN ENCLOSURE USED TO TEST THE EFFECTS OF SPECIFIED ENVIRONMENTAL CONDITIONS ON BIOLOGICAL ITEMS, INDUSTRIAL PRODUCTS, MATERIALS, AND ELECTRONIC DEVICES AND COMPONENTS.
General Specifications : THE TEMPERATURE WITHOUT HUMIDITY: 0⁰C TO +70⁰C/
WITH HUMIDITY: +5⁰C TO +70⁰C

THE HUMIDITY: 10 TO 90% RH

POWER REQUIREMENT:230V

WEIGHT(KG)/DIMENSION)MM): 64KG/560 X 480 X 400 MM
Capacity : 108 LITRE CAPACITY
CAPACITY FOR 5 GRID SYTLE SHELVES (2 SUPPLIED)
TEMPERATURE RANGE OF 0° TO 70°

UNIVERSAL COUNTER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : MEASURE AND SCREEN THE SHAPE OF COMPONENTS TO GET THE RIGHT SIZE AND MEASUREMENTS.
General Specifications :
Capacity :

UNIVERSAL TESTING MACHINE AND CONCRETE AND HEAVE STRUCTURE LABORATORY

Organisation : UNIVERSITI TEKNOLOGI PETRONAS (UTP)
Function : TESTING OF MATERIAL PROPERTIES; COMPRESSIVE STRENGTH, TENSILE STRENGTH, AND BENDING TEST
General Specifications :
Capacity : 1000KN UNIVERSAL TESTING MACHINE AND 500KN DYNAMIC MACHINE TO COND UCT TENSILE STRESS-STRAIN TESTS

FIELD EMISSION SCANNING ELECTRON MICROSCOPE

Organisation : UNVERSITI SAINS ISLAM MALAYSIA (USIM)
Function : FESEM IS AN ADVANCED TECHNOLOGY USED TO CAPTURE THE MICROSTRUCTURE IMAGE OF THE MATERIALS
General Specifications : JEOL IT 800 SHL

ENVIRONMENT MONITORING SYSTEM (EMS)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO MONITOR AND RECORD THE GROUND MOTION ACTIVITIES FROM EARTHQUAKES.
General Specifications :
Capacity :

50KN UNIVERSILE TENSILE

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : A UNIVERSAL TESTING MACHINE (UTM) IS USED TO TEST THE MECHANICAL PROPERTIES (TENSION, COMPRESSION ETC.) OF A GIVEN TEST SPECIMEN BY EXERTING TENSILE, COMPRESSIVE OR TRANSVERSE STRESSES. THE MACHINE HAS BEEN NAMED SO BECAUSE OF THE WIDE RANGE OF TESTS IT CAN PERFORM OVER DIFFERENT KIND OF MATERIALS.

TO PERFORM THE TENSILE, FLEXURAL, COMPRESSION AND INTERLAMINAR SHEAR STRESS TEST
General Specifications : 50KN LOAD CELL WITH CLASS 0.5 ACCURACY FOR LOAD RANGE FROM 1% TO 100% OF 50KN.

LOAD MEASUREMENT TRACEABLE TO NVLAP AND MEETS ASTM E4 & ISO 7500-1 STANDARDS (VERIFIED/ CALIBRATED BY INSTRON).

HTTPS://WWW.INSTRON.COM/EN/PRODUCTS/TESTING-SYSTEMS/UNIVERSAL-TESTING-SYSTEMS/LOW-FORCE-UNIVERSAL-TESTING-SYSTEMS
Capacity : LOAD CELL = 50KN

MAGNETIC STIRRER WITH HEATING

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : USED TO HEAT EVENLY AND MIX VARIOUS TYPES OF LIQUIDS AND SOLUTIONS.
General Specifications :
Capacity :

BET ANALYZER

Organisation : UNVERSITI SAINS ISLAM MALAYSIA (USIM)
Function : BET ANALYSIS IS AN ANALYTICAL TECHNIQUE UTILIZED FOR DETERMINING SPECIFIC SURFACE AREAS AND PORE SIZE DISTRIBUTIONS OF SOLID MATERIALS.
General Specifications : MICROMERITICS 3FLEX

POTENTIOMETER SET

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO MEASURE OR MONITOR DISPLACEMENT.
General Specifications :
Capacity :

TENSILE MACHINE

Organisation : NANOMALAYSIA BERHAD (NMB)
Function : TO MEASURE TENSILE STRENGTH, HOW STRONG A MATERIAL IS AND HOW MUCH IT CAN ELONGATE
General Specifications : -
Capacity : -

INDUCTIVELY COUPLED PLASMA - MASS SPECTROMETRY (ICP-MS)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : ICP-MS IS A TYPE OF MASS SPECTROMETRY THAT USES AN INDUCTIVELY COUPLED PLASMA TO IONIZE THE SAMPLE. ICP-MS IS USED TO DETERMINE ELEMENTAL COMPOSITION OF VARIOUS SAMPLE TYPES WHICH INCLUDE RAW RUBBER, RUBBER COMPOUND, RUBBER PRODUCT, SOIL, PLANT, FERTILIZER, WATER, AND OTHER TYPES OF SAMPLES.
General Specifications :
Capacity :

GAS CHROMATOGRAPHY MASS SPECTROMETRY (EI-CI)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE GC-MS IS EQUIPPED WITH BOTH ELECTRON IONIZATION (EI) AND CHEMICAL IONIZATION (CI) CAPABLE OF ANALYSING DIFFERENT SUBSTANCES IN LOW AND SEMI VOLATILE COMPOUNDS.
General Specifications :
Capacity :

CHEMICAL PERMEATION BY GAS CHROMATOGRAPHY

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE LABORATORY IS ACCREDITED TO ISO/IEC17025 AS PER TEST METHOD BS EN 16523-1:2015 “DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS” AS KEY MEASURE TO EVALUATE THE EFFECTIVENESS OF A MATERIAL TO ACT AS A BARRIER TO THE CHALLENGE CHEMICALS AS FOLLOWS – METHANOL, ACETONE, DICHLOROMETHANE, TOLUENE, TETRAHYDROFURAN, ETHYL ACETATE AND N-HEPTANE.
General Specifications :
Capacity :

VARIOUS OF TESTING FACILITIES FOR RUBBER (PHYSICAL TESTING)

Organisation : MALAYSIAN RUBBER BOARD (MRB) (G-TACR)
Function : TYPE OF TEST:
1- ABRASION 2- HARDNESS
3- BRITTLENESS LOW TEMP
4- OZONE RESISTANCE
5- COMPRESSION STRESS-RELAXION 6- CUFF RUPTURE RESISTANCE
7- STIFFNESS IN COMPRESSION & SHEER 8- DYNAMIC PROPERTIES
9-WATER TIGHTNESS/FREEDOM FROM HOLES 13- SEISMIC BEARING
14- SHOE
15- HOUSEHOLD INDUSTRAIL GLOVES
16-LPG TUBING
17- SURGICAL GLOVES
General Specifications : INDUSTRY STANDARD TEST / GLOBAL STANDARDS
Capacity :

DRILLING MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO MAKE HOLES ON THE MATERIAL SURFACE.
General Specifications :
Capacity :

TENSILE TESTING MACHINE-INSTRON 3366 UNIVERSAL TESTING MACHINE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : STATIC TESTING ENCOMPASSES THE EVALUATION OF MATERIAL STRENGTH AND DEFORMATION CHARACTERISTICS THROUGH THE APPLICATION OF FORCES, SUCH AS TENSILE, COMPRESSION, FLEXURAL, OR BENDING FORCES, WITH A MAXIMUM CAPACITY RANGING UP TO10KN
General Specifications : 3365 (5KN)-MAXIMUM CAPACITY FOR TESTING.
3366 (10KN)-MAXIMUM CAPACITY FOR TESTING.
Capacity : <10KN

THERMOGRAVIMETRIC ANALYZER (TGA 4000)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : IDENTIFICATION OF PHYSICAL PROPERTIES AND THERMAL TRANSITIONS OF POLYMERIC SAMPLES
General Specifications : -
Capacity : RESEARCH

FOURIER TRANSFORM INFRARED

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : ANALYSIS OF FUNCTIONAL GROUP GROUP DETERMINATION.
General Specifications : TRANSITION & REFLECTANCE
RANGE: 11500CM-1 - 50CM-1
Capacity : N/A

SIMULTANEOUS THERMAL ANALYZER (STA)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : PYROLISIS TEST, DECOMPOSITION TEST, MASS LOSS
General Specifications : FURNACE WITH MICROBALANCE.
ANALYSIS SOFTWARE PYRIS
Capacity : 1. TEMPERATURE RANGE ROOM TEMP UP TO 900'C
2. GAS (N2,O2,AIR
3. SAMPLE REQUIREMENT: 10-20MG

ULTRAMICROTOMY & CRYO ULTRAMICROTOMY, LEICA EM UC7

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : ULTRAMICROTOMY IS MAINLY USED AS A SAMPLE PREPARATION METHOD FOR TRANSMISSION ELECTRON MICROSCOPY (TEM)

ULTRAMICROTOMY CAN BE USED FOR MULTIPLE TYPES OF SAMPLES, INCLUDING BIOLOGICAL SPECIMENS AND INDUSTRIAL MATERIALS, E.G. POLYMERS (RUBBER AND PLASTICS) AND DUCTILE, HARD, OR BRITTLE MATERIALS (METALS OR CERAMICS)

IT IS A VERSATILE TECHNIQUE TO CUT SOFT MATERIALS, ESPECIALLY RUBBER, AND THE THICKNESS CAN BE UP TO NANO SCALE
General Specifications : FULL CONTROL OVER ALL SECTIONING PARAMETERS WITH THE ERGONOMIC TOUCH-SCREEN CONTROL PANEL

USER DEFINED QUICK ACCESS PRESETS

HIGH REPRODUCIBLE SECTIONING CAPABILITIES THANKS TO ACCURATE FEED SETTINGS OF THE FULLY MOTORIZED KNIFE STAGE AND AUTO-TRIM FUNCTION

CUTTING SPEED RANGE FROM 0.05 TO 100 MM/S

VIBRATION-DECOUPLED GRAVITY-STROKE CUTTING ARM FOR CHATTER-FREE SECTIONING
Capacity : THE LEICA EM UC7 ULTRAMICROTOME IS ABLE
TO PREPARE HIGH-QUALITY ULTRATHIN SECTIONS
WITH A THICKNESS FEED FROM 1 NM TO 15UM
WITH CUTTING SPEED FROM 0.05 TO 100 MM/S

IT HAS A BINOCULAR, WITH THE VIDEO CAMERA, AND ILLUMINATION FOR THE TOP, BACK,
AND TRANSMITTED LIGHT

MACRO THERMOGRAVIMETRIC ANALYZER (MACRO TGA)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE LABORATORY HOUSES ONE UNIT THERMOGRAVIMETRIC ANALYZER MODEL LECO TGA701 CAPABLE OF PERFORMING MULTIPLE CONSTITUENT ANALYSIS SUCH AS MOISTURE, VOLATILE MATTER AND ASH FROM A SINGLE SAMPLE AND ANALYSIS BATCH SEQUENCE.
General Specifications :
Capacity :

PSL-HUB/ VICKERS HARDNESS

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : THE INNOVATEST® FALCON 450 IS A HIGH-PRECISION HARDNESS TESTING MACHINE, UTILIZING ADVANCED TECHNOLOGY FOR ACCURATE, AUTOMATED TESTING OF VARIOUS MATERIALS' HARDNESS.
General Specifications : SCALES: MICRO VICKERS, VICKERS, KNOOP BRINELL
OBJECTIVES: 5X, 10X, 20X, 50X, 100X
Capacity : FOR MATERIALS WITH LOW VARIABILITY IN HARDNESS, A SMALLER SAMPLE SIZE MAY BE SUFFICIENT. FOR MATERIALS WITH HIGH VARIABILITY, A LARGER SAMPLE SIZE WILL PROVIDE MORE RELIABLE RESULTS.

GLOBAL POSITIONING SYSTEM

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO "PIN" GEOLOCATIONS.
General Specifications :
Capacity :

GEL PERMEATION CHROMATOGRAPHY (GPC)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : GEL PERMEATION CHROMATOGRAPHY (GPC), ALSO KNOWN AS SIZE EXCLUSION CHROMATOGRAPHY (SEC) IS BEING USED AS A TOOL TO ANALYZE THE CHARACTERISTICS OF A POLYMER SUCH AS NUMBER AVERAGE MOLECULAR WEIGHT (MN), WEIGHT AVERAGE MOLECULAR WEIGHT (MW), Z-AVERAGE MOLECULAR WEIGHT (MZ) AND ITS MOLECULAR WEIGHT DISTRIBUTION (MWD)
General Specifications :
Capacity :

X-RAY SINGLE WAVELENGTH

Organisation : UNIVERSITY OF MALAYA (UM)
Function : IDENTIFICATION AND CHARACTERIZATION OF CRYSTALLINE MATERIAL
General Specifications : -
Capacity : RESEARCH

OPTICAL PHOTOTHERMAL INFRARED (O-PTIR)

Organisation : MIMOS BERHAD (MIMOS)
Function : OPTIR IS A COMBINATION OF INFRARED (IR) SPECTROSCOPY AND THERMAL IMAGING THAT ALLOWS FOR THE SIMULTANEOUS CAPTURE OF BOTH IR AND RAMAN DATA (IR+RAMAN), RESULTING IN FASTER DATA ACQUISITION AND ENHANCED CONFIDENCE IN THE RESULTS. THE SYSTEM SUPPORTS POINT SPECTROSCOPY, SINGLE-LINE ARRAY SPECTROSCOPY, AND IR (IR+RAMAN) HYPERSPECTRAL IMAGING. FURTHERMORE, IT ENABLES IR IMAGING AT SPECIFIC WAVENUMBERS OF INTEREST, OFFERING VERSATILE AND PRECISE ANALYSIS FOR VARIOUS APPLICATIONS. IT ALSO PROVIDES NON-CONTACT, NON-DESTRUCTIVE REFLECTION (FAR-FIELD) MODE MEASUREMENTS WITH LITTLE TO NO SAMPLE PREPARATION. OPTIR ALLOWS SUBMICRON-SCALE RESOLUTION, ENABLING PRECISE ANALYSIS OF VERY SMALL FEATURES AND COMPONENTS
General Specifications : • SAMPLE DIMENSION: 150 X 100 X 20MM
• TYPE OF SAMPLE: ALL TYPE OF MATERIALS BUT NOT SUITABLE FOR METAL AND METAL OXIDE
• STAGE MINIMUM STEP SIZE: 100NM
• LASER WAVELENGTH OPTION: STANDARD: 532 NM
• DETECTOR: STANDARD & APD
• SPECTRAL RANGE:
OPTIR+ IR: 1800-800 CM-1
RAMAN: 4100-200 CM-1
SPATIAL RESOLUTION: 500NM
FIELD OF VIEW:
-HIGH MAG (40X), WITH DIGITAL ZOOM: 68X51 µM
-HIGH MAG (40X), NO DIGITAL ZOOM: 136X102 µM
-LOW MAG (4X), WITH DIGITAL ZOOM: 520X390 µM
-LOW MAG (4X), NO DIGITAL ZOOM: 1560X1170 µM
Capacity : -

OPEN MILL

Organisation : NANOMALAYSIA BERHAD (NMB)
Function : MAINLY USED FOR RUBBER HEAT REFINING, PRESSING SHEET, PLASTICATING AND MIXING.
General Specifications : -
Capacity : -

PPMU/FIELD-EMISSION SCANNING ELECTRON MICROSCOPE (FESEM) WITH EDX

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : FESEM - OBSERVED THE TOPOGRAPHY, MORPHOLOGY, AND COMPOSITION OF VARIOUS MATERIALS AT NANOSCALE LEVELS.

EDX - DETECT ELEMENT IN THE SAMPLE. FROM BERYLIUM TO URANIUM
General Specifications : MAGNIFICATION - UP TO 200KX
TYPE OF SAMPLE - POWDER & SOLID (MUST IN DRY CONDITION)
Capacity : SAMPLE CRITERIA:
SOLID - MAX 2CM X 2CM
POWDER - 2G

HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : HPLC IS A TECHNIQUE THAT USES LIQUID AT A HIGH PRESSURE TO RUN THROUGH A COLUMN TO SEPARATE COMPONENTS OF A MIXTURE. IT IS USED TO ANALYZE AND DEVELOP ANALYTICAL METHODS FOR THE DETERMINATION OF RUBBER ACCELERATORS SUCH AS BHA, BHT, DPT, MBT, TMTD, ZDBC, ZDEC, ZDMC, ZMBI, ZMBT, AND ZPMC.
General Specifications :
Capacity :

RRIMETER - USING NEAR INFRA-RED TECHNIQUE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : RRIMETER IS PRIMARILY USED TO DETERMINE DRY RUBBER CONTENT (DRC) FOR RAW RUBBER SAMPLES (LATEX AND SOLID RUBBER). IT GIVES ACCURATE READING FASTER THAN ANY OTHER INSTRUMENT OR OTHER METHODS OF DRC DETERMINATION. OTHER PARAMETERS THAT CAN BE DETERMINED ARE TOTAL SOLID CONTENT, ALKALINITY, KOH NUMBER AND PH VALUE.
General Specifications :
Capacity :

HARDNESS TESTER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : HARDNESS TESTING, SPECIFICALLY MICROVICKERS AND ROCKWELL HARDNESS TESTING, INVOLVES ASSESSING THE RESISTANCE OF A MATERIAL TO INDENTATION OR PENETRATION USING SPECIALIZED INSTRUMENTS, WITH MICROVICKERS MEASURING AT MICROSCALE AND ROCKWELL MEASURING AT LARGER SCALES, PROVIDING VALUABLE INFORMATION ABOUT THE MATERIAL'S HARDNESS PROPERTIES.
General Specifications : -
Capacity : -

PERMEABILITY - FOURIER TRANSFORM INFRA-RED SPECTROMETER (PERMEABILITY-FTIR

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : PERMEABILITY-FTIR IS USED TO DETERMINE THE RESISTANCE OF PROTECTIVE GLOVE MATERIALS TO PERMEATION BY POTENTIALLY HAZARDOUS NON-GASEOUS CHEMICALS (CARBON DISULPHIDE AND DIETHYLAMINE) UNDER THE CONDITIONS OF CONTINUOUS CONTACT. PERMEATION IS THE PROCESS BY WHICH A CHEMICAL MOVE THROUGH A PROTECTIVE GLOVE MATERIAL ON A MOLECULAR LEVEL. PERMEATION PERFORMANCE LEVELS ARE CLASSIFIED ACCORDING TO THE BREAKTHROUGH TIME OF THE CHEMICAL THROUGH THE GLOVE MATERIAL.
General Specifications :
Capacity :

CUTTER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : SAMPLE PREPARATION: CUTTERS ARE USED TO PREPARE SAMPLES OF RUBBER FOR TESTING. ACCURATE AND CONSISTENT SAMPLE SIZES ARE CRUCIAL FOR RELIABLE RESULTS IN VARIOUS TESTS, SUCH AS TENSILE STRENGTH, ELONGATION, HARDNESS, AND ABRASION RESISTANCE.
General Specifications : PLASTIC OR RUBBER
Capacity : 50 SAMPLE/DAY

HPLC

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF COMPOUND FOR QUALITATIVE AND QUANTITATIVE ANALYSIS
General Specifications : -
Capacity : RESEARCH

THERMAL PROPERTIES TESTER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : FOR MEASURING SHORT, LINEAR DISTANCES IN MECHANICAL ENGINEERING, MACHINING, AND MANUFACTURING APPLICATIONS.
General Specifications :
Capacity :

FIELD EMISSION SCANNING ELECTRON MICROSCOPE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO CAPTURE THE MICROSTRUCTURE IMAGE OF THE MATERIALS UP TO NANO SCALE.
General Specifications : RESOLUTION AT OPTIMUM WORKING DISTANCE: 1.0 NM AT 15 KV (TLD-SE); 1.6 NM AT 1 KV (TLD-SE); 0.8 NM AT 30 KV (STEM).
Capacity : 8-10 SAMPLES/DAY

LATHE WOOD MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : CARRYING OUT CUTTING, TURNING, DRILLING, HOLE PUNCHING WORK FOR ALL TYPES OF ROUND SYMMETRICAL WORK BLOCKS.
General Specifications :
Capacity :

CREEP SYSTEM

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : CREEP TESTING IS USED TO MEASURE HOW A RUBBER MATERIAL DEFORMS OVER TIME WHILE SUBJECTED TO CONSTANT STRESS AT A CONSTANT TEMPERATURE.
General Specifications :
Capacity :

FIELD EMISSION SCANNING ELECTRON MICROSCOPY (FESEM)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : TOPOGRAPHICAL AND ELEMENTAL INFORMATION OF MATERIALS
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

PSL-HUB/ THERMOGRAVIMETRIC ANALYSIS (TGA)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : THE DTG-60H BY SHIMADZU IS A THERMOGRAVIMETRIC ANALYZER THAT MEASURES WEIGHT CHANGES OF A SAMPLE OVER TEMPERATURE, AIDING IN THERMAL STABILITY AND COMPOSITION ANALYSIS.
General Specifications : TEMPERATURE RANGE: AMBIENT TO 1500℃
MEASURABLE RANGE (TG): ±500MG
MEASURABLE RANGE (DTA): ±1000μV
WEIGHT READABILITY: 0.1μG
SAMPLE QUANTITY: 1G MAX. IN GROSS WEIGHT
Capacity : THE SAMPLE CAPACITY FOR THE DTG-60H IS TYPICALLY AROUND 100 MG, BUT THIS CAN VARY SLIGHTLY DEPENDING ON THE NATURE OF THE SAMPLE AND THE SPECIFIC CONDITIONS OF THE ANALYSIS.

THERMOGRAVIMETRIC ANALYSIS (TGA)

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : QUANTIFIES WEIGHT CHANGES IN A MATERIAL AS IT IS SUBJECTED TO CONTROLLED TEMPERATURE VARIATIONS, AIDING IN IDENTIFYING COMPOSITION AND THERMAL STABILITY.
General Specifications : METTLER TOLEDO
Capacity : -

CHEMICAL PREMEATION BY GAS CHROMATOGRAPHY

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE LABORATORY IS ACCREDITED TO ISO/IEC17025 AS PER TEST METHOD BS EN 16523-1:2015 “DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS” AS KEY MEASURE TO EVALUATE THE EFFECTIVENESS OF A MATERIAL TO ACT AS A BARRIER TO THE CHALLENGE CHEMICALS AS FOLLOWS – METHANOL, ACETONE, DICHLOROMETHANE, TOLUENE, TETRAHYDROFURAN, ETHYL ACETATE AND N-HEPTANE.
General Specifications :
Capacity :

MOONEY VISCOMETER

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : TO MEASURE THE VISCOSITY AND CURING CHARACTERISTICS OF RUBBER COMPOUNDS BY MEASURING THE TORQUE REQUIRED TO ROTATE A ROTOR WITHIN A RUBBER SAMPLE.
General Specifications :
Capacity :

AFM-ATOMIC FORCE MICROSCOPE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : FOR THE MEASUREMENT OF SURFACE TOPOGRAPHY OF A SAMPLE BY SCANNING THE CANTILEVER OVER A REGION OF INTEREST.
General Specifications :
Capacity :

FRACTION COLLECTOR

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : COLLECTS FRACTIONS IN TUBES PLACED ON RACKS ACCORDING TO THE METHOD SETTING.
General Specifications :
Capacity :

COMBINATION PH/MV/CONDUCTIVITY METER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : A DEVICE THAT MEASURES THE VIBRATION, OR MOTION OF A STRUCTURE.
General Specifications :
Capacity :

ZETA POTENTIAL ANALYSER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : ZETA POTENTIAL IS THE ELECTRICAL POTENTIAL AT THE SLIPPING PLANE. THIS PLANE IS THE INTERFACE THAT SEPARATES MOBILE FLUID FROM FLUID THAT REMAINS ATTACHED TO THE SURFACE. IT IS CALCULATED FROM THE ELECTROPHORETIC MOBILITY OF PARTICLES BY APPLYING THE SMOLUCHOWSKI EQUATION.
General Specifications :
Capacity :

ANALYTICAL BALANCE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO PERFORM SPECIFIC TASKS SUCH AS WEIGHING TEST MATERIALS AND SAMPLING AMOUNT. OFFERING READABILITY UP TO 0.0001 G
General Specifications :
Capacity :

SCANNER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : CAPTURES IMAGES FROM PHOTOGRAPHIC PRINTS, POSTERS, MAGAZINE PAGES AND SIMILAR SOURCES FOR COMPUTER EDITING AND DISPLAY.
General Specifications :
Capacity :

WELDING MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : CONNECTING BETWEEN 2 OR MORE METALS USING THE APPROPRIATE ELECTRODE FOR THE WORK MATERIAL/METAL.
General Specifications :
Capacity :

GRINDING MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO ROLL THE METAL SURFACE TO PRODUCE A SMOOTH SURFACE AND GET PRECISE MEASUREMENT ACCURACY.
General Specifications :
Capacity :

CHN-S ANALYZER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE LABORATORY HOUSES ONE UNIT LECO MODEL CHN628S ELEMENTAL ANALYSIS BY COMBUSTION CAPABLE OF DETERMINE SIMULTANEOUSLY CARBON, HYDROGEN, NITROGEN AND SULFUR IN SOLID OR LIQUID MICRO SAMPLES.
General Specifications :
Capacity :

THERMOGRAVIMETRIC ANALYZER (TGA)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : IMPORTANT INSTRUMENTS TO MEASURE THE THERMAL PROPERTIES OF THE MATERIAL
General Specifications :
Capacity :

HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPE (HRTEM), FEI, TECNAI, G2 20, S-TWIN

Organisation : UNIVERSITI SAINS MALAYSIA (USM)
Function : TRANSMISSION ELECTRON MICROSCOPES (TEM) ARE MICROSCOPES THAT USE A PARTICLE BEAM OF ELECTRONS TO VISUALIZE SPECIMENS AND GENERATE A HIGHLY MAGNIFIED IMAGE. TEMS CAN MAGNIFY OBJECTS UP TO 2 MILLION TIMES

TEM OFFERS INVALUABLE INFORMATION ON THE INNER STRUCTURE OF THE SAMPLE, SUCH AS CRYSTAL STRUCTURE, MORPHOLOGY, AND STRESS STATE INFORMATION
General Specifications : ELECTRON ACCELERATION VOLTAGE 120 KV TO 200 KV
VOLTAGE UP TO 200 KV.
FIELD EMISSION GUN.
TWIN-LENSES SYSTEM.
CAMERA EAGLE CCD 4K.
EUCENTRIC GONIOMETER COMPUSTAGE.
MAXIM EUCENTRIC INCLINATION: +/- 80º.
POINT RESOLUTION: 0,28 NM.
LINE RESOLUTION: 0,144 NM.
Capacity : 200KV FIELD EMISSION TRANSMISSION ELECTRON MICROSCOPE (FEG) WITH A RESOLUTION (POINT RESOLUTION) OF 0.24NM.

PPMU /THERMOGRAVIMETRIC ANALYSIS (TGA)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : MEASURES THE THERMAL STABILITY AND COMPOSITION OF RUBBER BY ANALYZING WEIGHT CHANGES AS A FUNCTION OF TEMPERATURE
General Specifications : SOLID, LIQUID & POWDER SAMPLE. MAX TEMP. UP TO 1000C.
Capacity : 5-10MG

INJECTION MOLDING MACHINE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO INJECT PLASTIC MOLTEN INTO A DIE MOULD.
General Specifications : -
Capacity : -

DART-TOF MS

Organisation : UNIVERSITY OF MALAYA (UM)
Function : RAPID ANALYSIS OF SAMPLES WITHOUT THE NEED OF SAMPLE PREPARATION (DIRECT ANALYSIS)
General Specifications : JEOL ACCU TOF-DART MASS SPECTROMETER. A DIRECT ANALYSIS REAL TIME (DART) ION SOURCE ATTACHED TO A TOF MASS SPECTROMETER, WHICH ENABLES THE ANALYSIS OF SAMPLES DIRECTLY, WITHOUT ANY SAMPLE PREPARATION TIME.
Capacity : RESEARCH

XRF, μEDX-1400

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATION OF ELEMENTAL COMPOSITION OF MATERIALS
General Specifications : -
Capacity : RESEARCH

THREADING MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : MAKING THREADS OR SCREW GROOVES FOR IRON BARS.
General Specifications :
Capacity :

DIFFERENTIAL SCANNING CALORIMETER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : ANALYSIS OF:
1. GLASS TRANSITION
2. MELTING POINT
3. CRYSTALINITY
4. SPECIFIC HEAT
General Specifications : TEMPERATURE RANGE -150 TO 700 °C ,SENSOR FRS 5+ WITH 56 THERMOCOUPLES OR HSS 8+ WITH 120 THERMOCOUPLES , HEATING RATE 0.02 TO 300 K/MIN
Capacity : 7-20MG

NOISE LEVEL METER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO DELIVER DYNAMIC INPUT RANGE FOR CAPTURING SOUND AND VIBRATION DATA IN A WIDE RANGE OF DEMANDING MEASUREMENT APPLICATIONS.
General Specifications :
Capacity :

POWER PACK ST PRESS 400T AND 600T

Organisation : NANOMALAYSIA BERHAD (NMB)
Function : TO SUPPORT ELECTRICAL SUPPLY FOR BOTH ST PRESS 400T/600T
AND 400T/600T PRESS LIFT.
General Specifications : -
Capacity : 400T AND 600T

ELECTROANALYTICAL SYSTEM 1

Organisation : UNIVERSITY OF MALAYA (UM)
Function : MEASUREMENT OF ELECTROCHEMICAL IN ANALYTE
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

HARDNESS TESTER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : A TOOL USED TO TEST THE HARDNESS LEVEL OF A MATERIAL.
General Specifications :
Capacity :

CALIPER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : A TOOL FOR MEASURING THE LENGTH OR DIAMETER OF AN OBJECT.
General Specifications :
Capacity :

SHORE A DUROMETER

Organisation : TUNKU ABDUL RAHMAN UNIVERSITY OF MANAGEMENT AND TECHNOLOGY (TAR UMT)
Function : MEASURE THE RESISTANCE OF ELASTOMER TO INDENTATION
General Specifications : MEASURE THE RESISTANCE OF A MATERIAL TO INDENTATION. THE GAUGE (LOOKS LIKE A ROUND TIRE PRESSURE GAUGE) HAS A NEEDLE ON A SPRING PROTRUDING FROM ONE END. THE NEEDLE IS PLACED AGAINST THE RUBBER OR PLASTIC AND PRESSURE IS APPLIED.
ONCE THE GAUGE IS PRESSED FIRMLY AGAINST THE MATERIAL AND THE NEEDLE HAS PENETRATED AS FAR AS IT CAN GO, THE MEASUREMENT NEEDLE WILL INDICATE THE CORRESPONDING HARDNESS MEASUREMENT.
Capacity :

INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP MS)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATION OF ELEMENTAL COMPOSITION OF MATERIALS
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

SAW MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO CUT TREE LOT INTO SMALLER PIECES
General Specifications :
Capacity :

UNIVERSAL TESTING MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO CONDUCT STATIC, DYNAMIC, AND DURABILITY TESTING FOR ELASTOMERIC MATERIAL.
General Specifications :
Capacity :

X-RAY DUAL WAVELENGTH

Organisation : UNIVERSITY OF MALAYA (UM)
Function : IDENTIFICATION AND CHARACTERIZATION OF CRYSTALLINE MATERIAL
General Specifications : -
Capacity : RESEARCH

HOT PRESS

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : 1. CURING AND VULCANIZATION: THE HOT PRESS IS PRIMARILY USED TO CURE OR VULCANIZE RUBBER COMPOUNDS.
2. MOLDING: THE HOT PRESS CAN MOLD RUBBER INTO VARIOUS SHAPES AND FORMS.
3. SAMPLE PREPARATION: THE HOT PRESS ENSURES THAT SAMPLES ARE CONSISTENTLY PRODUCED WITH THE DESIRED THICKNESS AND SURFACE FINISH, WHICH IS ESSENTIAL FOR ACCURATE AND REPEATABLE TESTING.
4. MATERIAL CHARACTERIZATION: AFTER CURING RUBBER SAMPLES USING A HOT PRESS, RESEARCHERS CAN PERFORM VARIOUS TESTS TO CHARACTERIZE THE MATERIAL.
5. OPTIMIZATION OF CURING CONDITIONS: RESEARCHERS CAN EXPERIMENT WITH DIFFERENT TEMPERATURES, PRESSURES, AND CURING TIMES USING THE HOT PRESS.
6. LAMINATING LAYERS: A HOT PRESS IS USED TO LAMINATE MULTIPLE LAYERS OF RUBBER OR RUBBER WITH OTHER MATERIALS, CREATING COMPOSITE MATERIALS WITH UNIQUE PROPERTIES.
General Specifications : PLASTIC OR RUBBER
Capacity : 20 SAMPLES/DAY

POWDER X-RAY DIFFRACTION

Organisation : UNIVERSITY OF MALAYA (UM)
Function : IDENTIFICATION AND CHARACTERIZATION OF CRYSTALLINE MATERIAL
General Specifications : -
Capacity : RESEARCH

RHEOMETER

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : TO MEASURE AND ANALYZE THE RHEOLOGICAL PROPERTIES OF MATERIALS, SUCH AS VISCOSITY, ELASTICITY, AND FLOW BEHAVIOR, UNDER DIFFERENT CONDITIONS OF STRESS, STRAIN, AND TEMPERATURE.
General Specifications : -
Capacity : -

GC-FID GAS CHROMATOGRAPHY FLAME IONIZATION DETECTOR

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF COMPOUND FOR QUALITATIVE AND QUANTITATIVE ANALYSIS
General Specifications : -
Capacity : RESEARCH

PPMU / FOURIER TRANSFORM INFRARED SPECTROSCOPY (FTIR)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : USED TO IDENTIFY THE CHEMICAL STRUCTURE AND FUNCTIONAL GROUPS PRESENT IN THE RUBBER.
General Specifications : SOLID & POWDER SAMPLE. MAX TEMP. UP TO 1000C.
Capacity : 5-10MG (TEMPERATURE 30 TO 900 DEG C)

UNIVERSAL TESTING MACHINE

Organisation : TAYLOR'S UNIVERSITY (TAYLORS)
Function : TENSILE TEST, COMPRESSION TEST, FLEXURAL TEST
General Specifications : INSTRON 5569 UNIVERSAL TESTING MACHINE
Capacity : 50 KN LOAD CELL
THREE POINT BENDING TEST
TENSILE TEST
COMPRESSION TEST

PLASMA FIB + LASER MICROMACHINING

Organisation : MIMOS BERHAD (MIMOS)
Function : "THE PLASMA FOCUSED ION BEAM (FIB) SYSTEM IS A DUAL-BEAM WORKSTATION THAT INTEGRATES A HIGH-PERFORMANCE PLASMA ION COLUMN AND A FESEM COLUMN ON A SINGLE PLATFORM. IT ENABLES HIGH-THROUGHPUT MILLING, LARGE-AREA CROSS-SECTIONING, AND NANOSCALE IMAGING OF ADVANCED MATERIALS AND SEMICONDUCTOR DEVICES.
THE USE OF A PLASMA ION SOURCE ALLOWS FOR FAST MATERIAL REMOVAL RATES WHILE MINIMIZING BEAM-INDUCED DAMAGE, MAKING IT IDEAL FOR LARGE-VOLUME CROSS-SECTIONING AND SAMPLE PREPARATION. THE SYSTEM SUPPORTS FUNCTIONS SUCH AS TRENCH MILLING, LAMELLA PREPARATION FOR TEM, ION AND ELECTRON IMAGING, AND DEPOSITION OF PROTECTIVE LAYERS.
APPLICATIONS INCLUDE ADVANCED FAILURE ANALYSIS, SAMPLE PREPARATION FOR TRANSMISSION ELECTRON MICROSCOPY (TEM), PROCESS CHARACTERIZATION, AND MATERIALS RESEARCH ACROSS VARIOUS INDUSTRIES, INCLUDING SEMICONDUCTORS, ELECTRONICS, AND MATERIALS SCIENCE."
General Specifications : - 6 INCH SAMPLE HOLDER
- PLASMA FIB
O XE PLASMA SOURCE
O 12NM RESOLUTION AT 30KV
O ION BEAM ENERGY RANGE: 3 KEV–30 KEV
O PROBE CURRENT: 1 PA–3 μA
- FESEM
O 1.2NM AT 1KV
O MAXIMUM FIELD OF VIEW: 1 MM
O SE AND BSE "
Capacity : -

FT-NMR ADVANCE 400MHZ

Organisation : UNIVERSITY OF MALAYA (UM)
Function : ELUCIDATION OF COMPOUND
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

MILLING MACHINE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : GRINDING FLAT SURFACES, PUNCHING HOLES, MAKING SCREW GROOVES USING SHAPED GRINDING TOOL POINTS.
General Specifications :
Capacity :

LATEX DIPPING MACHINE

Organisation : UNIVERSITI KUALA LUMPUR (UNIKL)
Function : TO AUTOMATE THE PROCESS OF IMMERSING FORMERS OR MOLDS INTO A LATEX SOLUTION, COATING THEM UNIFORMLY, AND FACILITATING THE CURING AND DRYING OF THE LATEX TO PRODUCE LATEX GLOVES OR OTHER LATEX-COATED PRODUCTS.
General Specifications : -
Capacity : -

TENSIOMETER

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : FOR THE DETERMINATION OF TENSILE STRENGTH OF LATEX FILMS
General Specifications :
Capacity :

INDUCTIVE COUPLE PLASMA-OPTICAL EMISSION SPECTROMETER (ICP-OES)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : ICP-OES IS USED TO DETERMINE ELEMENTAL COMPOSITION OF VARIOUS SAMPLE TYPES WHICH INCLUDE RAW RUBBER, RUBBER COMPOUND, RUBBER PRODUCT, SOIL, PLANT, FERTILIZER, WATER, AND MANY OTHER TYPES OF SAMPLES. THE AVAILABLE ICP-OES PROVIDES QUANTITATIVE DATA FOR 23 ELEMENTS IN A SINGLE MEASUREMENT. SAMPLE PREPARATION TYPICALLY INVOLVES DIGESTING OR DILUTING THE SAMPLE TO ENSURE IT IS IN A SUITABLE FORM FOR ANALYSIS.
General Specifications :
Capacity :

DIFFERENTIAL SCANNING CALORIMETER

Organisation : TAYLOR'S UNIVERSITY (TAYLORS)
Function : DSC TESTS
General Specifications : PERKIN ELMER DSC 8500
Capacity : -

TUBE FURNACE

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : SYNTHESIS BAHAN NANO BERASASKAN KARBON ATAU METAL OXIDE ATAU PENYINGKIRAN BAHAN KOTORAN (REMOVAL OF IMPURITIES) MENGGUNAKAN GAS N/AR

(SUHU 100-1000°C)
General Specifications :
Capacity :

RHEOMETER

Organisation : NANOMALAYSIA BERHAD (NMB)
Function : TO MEASURE APPARENT VISCOSITY OVER A BROAD RANGE OF SHEAR RATES
General Specifications : -
Capacity : -

HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - UVVIS

Organisation : UNIVERSITI TEKNOLOGI PETRONAS (UTP)
Function : QUANTITATIVE ANALYSIS OF CHEMICAL COMPOUNDS IN LIQUID SAMPLES
General Specifications : SHIMADZU
Capacity : DETECTION CHEMICAL COMPOUNDS PRESENT IN LIQUID SAMPLES

UNIVERSAL TESTING MACHINE 3366

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO MEASURE MECHANICAL PROPERTIES.
General Specifications : 10KN CAPACITY, CAN MEASURE COMPOSITES/ REINFORCED PLASTICS MATERIAL IN COMPRESSION AND STRENGTH
Capacity : 30 SAMPLES/ DAY

UNIVERSAL OVEN

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : THE UNIVERSAL OVEN IS AN APPLIANCE FOR HEATING AND DRYING.
General Specifications :
Capacity :

UNIVERSAL TENSILE MACHINE (UTM) - 30KN

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : MECHANICAL TESTING SUCH AS TENSILE, FLEXURAL AND COMPRESSION
General Specifications : LOAD CELL - 30KN
INCLUDE EXTENSOMETER 25MM
MS ISO/IEC 17025 ACCREDITED FOR TENSILE AND FLEXURAL PROPERTIES FOR PLASTIC AND PLASTIC COMPOSITE
Capacity : 40-60 SAMPLES/DAY

MAGNETIC SIRRER

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : 1. DISSOLVING ADDITIVES: MAGNETIC STIRRERS ARE USED TO DISSOLVE SOLID ADDITIVES OR CHEMICALS INTO SOLVENTS BEFORE THEY ARE MIXED INTO RUBBER COMPOUNDS.
2. HOMOGENEOUS MIXING OF SOLUTIONS: WHEN PREPARING CHEMICAL SOLUTIONS, SUCH AS FOR THE SURFACE TREATMENT OF RUBBER OR FOR CREATING DISPERSION OF NANOPARTICLES, A MAGNETIC STIRRER ENSURES THAT THE COMPONENTS ARE UNIFORMLY MIXED, PREVENTING SETTLING OR UNEVEN DISTRIBUTION.
3. PREPARATION OF LATEX SOLUTIONS: IN RESEARCH INVOLVING LATEX RUBBER, MAGNETIC STIRRERS ARE USED TO MIX AND MAINTAIN LATEX SOLUTIONS AT A CONSISTENT CONCENTRATION.
General Specifications : NATURAL RUBBER LATEX, RUBBER SOLUTION, CHEMICALS SOLLUTIONS (ADDITIVES, ANTI-OXIDANTS, CROSSLINKERS)
Capacity : 10 SAMPLE/DAY

FT-NMR ECX 400 MZ

Organisation : UNIVERSITY OF MALAYA (UM)
Function : ELUCIDATION OF COMPOUND
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

PSL-HUB/ X-RAY DIFFRACTION (XRD)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : THE RIGAKU SMARTLAB X-RAY DIFFRACTION (XRD) SYSTEM ENABLES PRECISE MATERIAL CHARACTERIZATION BY ANALYZING CRYSTALLOGRAPHIC STRUCTURES, PHASE IDENTIFICATION, AND QUANTIFYING CRYSTAL ORIENTATIONS IN SAMPLES.
General Specifications : X-RAY DIFFRACTION SYSTEM FEATURES THE PHOTONMAX HIGH-FLUX 9 KW ROTATING ANODE X-RAY SOURCE COUPLED WITH A HYPIX-3000 HIGH-ENERGY-RESOLUTION 2D MULTI-DIMENSIONAL SEMICONDUCTOR DETECTOR THAT SUPPORTS 0D, 1D AND 2D MEASUREMENT MODES
Capacity : THE SAMPLE HOLDER FOR THE RIGAKU SMARTLAB CAN ACCOMMODATE STANDARD SAMPLES UP TO APPROXIMATELY 50 MM IN DIAMETER. THE THICKNESS CAN VARY, BUT IT'S USUALLY UP TO ABOUT 10 MM.

PSL-HUB/ SCANNING PROBE MICROSCOPE (SPM@AFM)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : THE SPA300HV BY SII NANOTECHNOLOGY INC. IS AN ADVANCED SURFACE PROFILER USED FOR HIGH-PRECISION MEASUREMENT AND ANALYSIS OF SURFACE ROUGHNESS AND TOPOGRAPHY IN VARIOUS MATERIALS.
General Specifications : THE SPA300HV BY SII NANOTECHNOLOGY INC. IS A HIGH-PRECISION SCANNING PROBE MICROSCOPE FEATURING ADVANCED HV AFM/SPM CAPABILITIES, SUITABLE FOR NANOSCALE SURFACE ANALYSIS AND CHARACTERIZATION.
Capacity : DIAMETER: UP TO 10-20 MM
THICKNESS: TYPICALLY LESS THAN 10 MM, DEPENDING ON THE FOCUS RANGE AND CLEARANCE

CUTTING MACHINE (METAL)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : TO CUT METAL WITH HIGH PRECISION USING BRASS WIRE.
General Specifications :
Capacity :

FOURIER TRANSFORM INFRARED

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : DETERMINATION OF FUNCTIONAL GROUP
General Specifications : ATR TECHNIQUE USING DIAMOND
4000 - 525 RANGE
Capacity : 40-60 SAMPLES/DAY

RAYMINTEX PLANT

Organisation : MALAYSIAN NUCLEAR AGENCY (MNA)
Function : A PILOT PLANT FOR RADIATION VULCANIZATION OF NATURAL RUBBER LATEX
General Specifications : COBALT-60 SOURCE, LATEX STORAGE AND MIXING TANKS
Capacity : 48, 000 KG OF RADIATION VULCANIZATION NATURAL RUBBER LATEX FOR EVALUATION

PPMU / GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS)

Organisation : UNIVERSITI TEKNOLOGI MALAYSIA (UTM)
Function : SEPARATE, ANALYZE AND IDENTIFY VOLATILE ORGANIC COMPOUNDS IN THE SAMPLE.
General Specifications : GC MS WITH HEADSPACE. LIQUID & SOLID SAMPLES ONLY. COLUMN AVAILABLE: ELITE-5MS (30 METER, 0.25MMID, 0.25 UM DF. MAX TEMP. 350'C)
Capacity : AUTOSAMPLER 108 CHAMBERS (1.5ML VIAL) FOR GC, 40 CHAMBERS FOR HEADSPACE

GAS CHROMATOGRAPHY WITH FLAME-IONIZATION DETECTION (GC-FID)

Organisation : MALAYSIAN RUBBER BOARD (MRB)
Function : GC-FID IS AN ANALYTICAL TECHNIQUE THAT IS USED TO SEPARATE AND ANALYZE MIXTURES CONSISTING OF VOLATILE COMPONENTS. GC-FID IS PARTICULARLY USEFUL IN DETECTING AND QUANTIFYING ORGANIC COMPOUNDS, SUCH AS HIGHER FATTY ACIDS IN RUBBER, β-SITOSTEROL IN RUBBER COMPOUND SUCH AS RUBBERIZED BITUMEN AND DETERMINATION OF RESIDUAL MONOMERS.
General Specifications :
Capacity :

DIFFERENTIAL SCANNING CALORIMETER (DSC Q20)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : IDENTIFICATION OF PHYSICAL PROPERTIES AND THERMAL TRANSITIONS OF POLYMERIC SAMPLES
General Specifications : -
Capacity : RESEARCH

THERMAL GRAVIMETRIC ANALYSER

Organisation : TAYLOR'S UNIVERSITY (TAYLORS)
Function : TGA TEST
General Specifications : PERKIN ELMER TGA 8000
Capacity : -

TRANSMISSION ELECTRON MICROSCOPES (TEM)

Organisation : UNIVERSITI MALAYSIA SARAWAK (UNIMAS)
Function : A MICROSCOPES THAT USE A PARTICLE BEAM OF ELECTRONS TO VISUALIZE SPECIMENS AND GENERATE A HIGHLY-MAGNIFIED IMAGE. TEMS CAN MAGNIFY OBJECTS UP TO 2 MILLION TIMES.
General Specifications : -
Capacity : -

BATTERY TESTER

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : ANALYSIS
General Specifications : BATTERY TESTING
Capacity : 3

COATER MACHINE

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : COATING
General Specifications : MAKING ELECTRODE
Capacity : 1

ELECTROCHEMICAL STATION

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : ANALYSIS
General Specifications : VARIOUS ELECTROCHEMICAL ANALYSIS
Capacity : 1

PH METER

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : ANALYSIS
General Specifications : TEST PH
Capacity : 1

GLOVEBOX

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : INERT CONDITION
General Specifications : MAKING BATTERY
Capacity : 1

COINCELL CRIMPER

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : SEALING
General Specifications : SEAL COIN CELL
Capacity : 1

HIGH PERFORMANCE LIQUID CHROMATOGRAPHY

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : COMPOUND SEPARATION
General Specifications : -
Capacity : -

FTIR

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : IDENTIFY COMPOUND FUNCTIONAL GROUP
General Specifications : -
Capacity : -

GCFID

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : VOLATILE COMPOUND ANALYSIS ANALYSIS
General Specifications : -
Capacity : -

BRUNAUER-EMMETT-TELLER (BET) ANALYSIS

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : GAS ADSORPTION ANALYSIS
General Specifications : -
Capacity : -

ATOMIC ABSORPTION SPECTROPHOTOMETER

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : HEAVY METAL ANALYSIS
General Specifications : -
Capacity : -

FREEZE DRYER

Organisation : UNIVERSITI KEBANGSAAM MALAYSIA (UKM)
Function : SAMPLE PREPARATION
General Specifications : -
Capacity : -

FOURIER TRANSFORM INFRARED SPECTROSCOPY

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : TO DETERMINE THE FUNCTIONAL GROUP OF THE COMPOSITE POLYMER
General Specifications : THE FOURIER–TRANSFORM INFRARED (FT–IR) SPECTRA WILL BE RECORDED ON A BRUKER SPECTROMETER IN THE 500–4000 CM-1 WAVELENGTH RANGE SO THAT THE ATTENUATED TOTAL REFLECTANCE (ATR) MODE IS SELECTED DUE TO OUR SAMPLES WERE NOT TRANSPARENT.
Capacity : 20 SAMPLES/EACH COMPOSITE POLYMERS

FESEM/EDX

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : TO DETERMINE THE SURFACE AND COMPOSITION OF THE COMPOSITE POLYMER
General Specifications : THE FIELD–EMISSION SCANNING ELECTRON MICROSCOPY (FE–SEM) MICROGRAPHS WILL BE TAKEN UNDER VACUUM, ACCELERATED AT 20 KV TO STUDY THE MORPHOLOGY AND SIZE OF THE SYNTHESIZED SILVER NANOPARTICLES AND THE NANOFIBROUS MATS. THE EDAX ANALYSIS WILL BE PERFORMED USING THE EDAX ACCESSORY ON THE FE-SEM INSTRUMENT.
Capacity : 20 SAMPLES/EACH COMPOSITE POLYMERS

X-RAY DIFFRACTION SPECTROSCOPY

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : TO DETERMINE THE CRYSTALLINITY OF THE COMPOSITE POLYMER
General Specifications : THE XRD PATTERN OF THE AG NPS WILL BE TAKEN WITH AN X–RAY DIFFRACTOMETER USING CU Kα 209 RADIATION (λ = 1.5406 Å) TO CONFIRM ITS CRYSTALLINE NATURE AND ITS SUCCESSFUL SYNTHESIS. THE AMOUNTS OF SILVER NANOPARTICLES RELEASE FROM THE FIBER MATS WILL BE EXAMINED BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY.
Capacity : 20 SAMPLES/EACH COMPOSITE POLYMERS

UV-VIS SPECTROPHOTOMETER

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : TO MEASURE CELL VIABILITY FOR MTT ASSAY
General Specifications : THE CELL VIABILITY WILL BE MEASURED USING UV-VIS SPECTROPHOTOMETRY BASED ON THE TURBIDITY OF THE SAMPLES
Capacity : ALL COMPOSITE POLYMER WILL BE SUBJECTED TO TEST USING MTT ASSAY

GAS CHROMATOGRAPHY

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : TO SEPARATE AND DETECT THE CHEMICAL COMPONENTS OF A SAMPLE MIXTURE TO DETERMINE THEIR PRESENCE OR ABSENCE AND/OR QUANTITIES.
General Specifications : SCIENTIFIC EQUIPMENT
Capacity : -

HYBRID SUPERCRITICAL FLUID CHROMATOGRAPHY AND ULTRA HIGH PERFORMANCE LIQUID CHROMATOGRAPH (HYBRID SFC-UHPLC)

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : FOR ANALYSING SOLUBLE COMPOUNDS, MAKING IT HIGHLY USEFUL FOR FOOD SUBSTANCES, WATER PURIFICATION AND POLYMERS.
General Specifications : SCIENTIFIC EQUIPMENT
Capacity : -

MALVERN ZATASIZER NANO

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : A HIGH PERFORMANCE TWO ANGLE PARTICLE, ZETA-POTENTIAL, AND MOLECULAR SIZE ANALYZER FOR THE ENHANCED DETECTION OF AGGREGATES AND SMALL PARTICLES
General Specifications : SCIENTIFIC EQUIPMENT
Capacity : -

THERMAL ANALYZER

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : TO MEASURE THE MASS OF A SAMPLE AS IT IS HEATED OR COOLED, TO CHARACTERIZE THE MATERIALS USED IN VARIOUS ENVIRONMENTAL, FOOD, PHARMACEUTICAL, AND PETROCHEMICAL APPLICATIONS.
General Specifications : ENGINEERING TOOLS & EQUIPMENT
Capacity : -

FTIR SPECTROMETER

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : COLLECTS HIGH-RESOLUTION SPECTRAL DATA OVER A WIDE SPECTRAL RANGE.
General Specifications : ENGINEERING TOOLS & EQUIPMENT
Capacity : -

ZETA POTENTIAL SIZER

Organisation : INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (IIUM)
Function : TO DETERMINE THE STABILITY OF ITS SUSPENSION AND EMULSION.
General Specifications : SCIENTIFIC EQUIPMENT
Capacity : -

SERVICE OF FORMALDEHYDE EMISSION TEST USING DESSICATOR METHOD

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO MEASURE FORMALDEHYDE EMISSION
General Specifications : MATERIAL SUCH AS PANEL USING RUBBER LATEX ADHESIVE
Capacity : 5 SAMPLES/ DAY

UV-VIS SPECTROPHOTOMETER

Organisation : UNIVERSITI MALAYSIA SARAWAK (UNIMAS)
Function : USE A LIGHT SOURCE TO ILLUMINATE A SAMPLE WITH LIGHT ACROSS THE UV TO THE VISIBLE WAVELENGTH RANGE (TYPICALLY 190 TO 900 NM).
General Specifications : -
Capacity : -

SCANNING ELECTRON MICROSCOPE (SEM)

Organisation : UNIVERSITI MALAYSIA SARAWAK (UNIMAS)
Function : A TYPE OF MICROSCOPE WHICH USES A FOCUSED BEAM OF ELECTRONS TO SCAN A SURFACE OF A SAMPLE TO CREATE A HIGH RESOLUTION IMAGE. SEM PRODUCES IMAGES THAT CAN SHOW INFORMATION ON A MATERIAL'S SURFACE COMPOSITION AND TOPOGRAPHY.
General Specifications : -
Capacity : -

ATOMIC ABSORPTION SPECTROPHOTOMETRY (AAS)

Organisation : UNIVERSITI MALAYSIA SARAWAK (UNIMAS)
Function : TO DETERMINE THE CONCENTRATIONS OF INDIVIDUAL ELEMENTS IN A SAMPLE BY MEASURING THE SELECTIVE ABSORPTION OF LIGHT BY GASEOUS ATOMS PRODUCED BY SPRAYING A SOLUTION INTO A FLAME (FAAS) OR BY EVAPORATION IN A CARBON TUBE (CFAAS).
General Specifications : -
Capacity : -

AUTOCLAVE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO DESTROY/KILL MICROORGANISMS AND DECONTAMINATE BIOHAZARDOUS WASTE AND MICROBIOLOGICAL CONTAMINANTS.
General Specifications : TEMPERATURE AND PRESSURE RANGE 140 °C, 4 BAR ABSOLUTE PRESSURE
Capacity : 150LITER

AUTOCLAVE

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : TO DESTROY/KILL MICROORGANISMS AND DECONTAMINATE BIOHAZARDOUS WASTE AND MICROBIOLOGICAL CONTAMINANTS.
General Specifications : STERILIZATION TEMP RANGE 105C TO 135C
Capacity : 50LITER

FOURIER TRANSFORM INFRARED SPECTROPHOTOMETER (FT-IR)

Organisation : UNIVERSITI PUTRA MALAYSIA (UPM)
Function : AN ANALYTICAL TECHNIQUE USED TO IDENTIFY FUNCTIONAL GROUP OF ORGANIC, POLYMERIC, AND, IN SOME CASES, INORGANIC MATERIALS.
General Specifications : 1. MEASUREMENT OF 80‐6000CM ‐1 (MIR & FAR IR)
2. SPECTRAL RESOLUTION 0.16 CM-1
3. WAVENUMBER ACCURACY 0.005 CM-1
Capacity : 20 SAMPLES/MONTHS

FTIR SPEKTRUM 2

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATRION OF FUNCTIONAL GROUP OF CHARACTERIZING COMPOUND
Capacity : TEACHING & LEARNING AND RESEARCH

UV-VIS

Organisation : UNIVERSITI TEKNOLOGI PETRONAS (UTP)
Function : PROTEIN DETERMINATION ON LATEX
General Specifications : WAVELENGTH 750 NM
Capacity :

HPLC-PDA

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF COMPOUND FOR QUALITATIVE AND QUANTITATIVE ANALYSIS
General Specifications : -
Capacity : RESEARCH

MACHINE LEARNING FRAMEWORK TO PREDICT THE TENSILE STRESS OF NATURAL RUBBER

Organisation : MONASH UNIVERSITY MALAYSIA (MONASH)
Function : -
General Specifications : -
Capacity : -

STATE-OF-THE-ART 1G LABORATORY SCALE MODELING STUDIES, RUBBER SURFACE COATING TO DEVELOP ECO-COMPOSITES, PHYSICAL-CHEMICAL PROPERTIES OF RUBBERIZED COMPOSITES FOR APPLICATION IN THE CIVIL/CONSTRUCTION INDUSTRY.

Organisation : MONASH UNIVERSITY MALAYSIA (MONASH)
Function : -
General Specifications : -
Capacity : -

WORKSTATION FOR COMPUTING

Organisation : MONASH UNIVERSITY MALAYSIA (MONASH)
Function : -
General Specifications : -
Capacity : -

FLOTATION RIG

Organisation : MONASH UNIVERSITY MALAYSIA (MONASH)
Function : -
General Specifications : -
Capacity : -

FOCUS ON ENERGY EFFICIENCY MEASURES ON RUBBER PRODUCTION LINES AND FACTORY BUILDINGS

Organisation : MONASH UNIVERSITY MALAYSIA (MONASH)
Function : ENERGY AUDIT
- IDENTIFYING COST SAVING OPPORTUNITIES IN ENERGY EFFICIENCY
- CONTINUOUS IMPROVEMENT IN PRODUCTION EFFICIENCY
General Specifications : REQUIREMENT
- DATA / MEASUREMENT OF EXISTING ENERGY CONSUMPTION
- PROBLEMS TO BE SOLVED FOR PRODUCTION EFFICIENCY
Capacity : CONSULTATION / RESEARCH ON PROVIDING REQUIRED ENERGY SOLUTIONS.

OPTICAL MICROSCOPE

Organisation : MIMOS BERHAD (MIMOS)
Function : AN INSPECTION TOOL USING OPTICAL METHOD TO REVIEW PHYSICAL DEFECT WITH INTERFERENCE CONTRAST(DIC), BRIGHT-FIELD(BF) AND DARK-FIELD(DF) CAPABILITIES.
General Specifications : -
Capacity : -

DIGITAL MICROSCOPE

Organisation : MIMOS BERHAD (MIMOS)
Function : AN INSPECTION TOOL USING DIGITAL METHOD TO REVIEW PHYSICAL DEFECT WITH 2D AND 3D IMAGE CAPTURING WITH SAME DEPTH OF FIELD. IT HAS TILTING CAPABILITY
General Specifications : -
Capacity : -

3D X-RAY

Organisation : MIMOS BERHAD (MIMOS)
Function : A NON-DESTRUCTIVE 3D INSPECTION TOOL TO DETERMINE THE INTERNAL CONDITIONS OF SEALED DEVICES
General Specifications : -
Capacity : -

MECHANICAL POLISHER

Organisation : MIMOS BERHAD (MIMOS)
Function : A SAMPLE PREPARATION TOOL TO POLISH SAMPLE USING MECHANICAL METHOD FOR CROSS-SECTION VIEWING.
General Specifications : -
Capacity : -

SURFACE PROFILER

Organisation : MIMOS BERHAD (MIMOS)
Function : AN INSPECTION TOOL THAT USES STYLUS TIP FOR MEASURING ROUGHNESS ON SAMPLE SURFACES.
General Specifications : -
Capacity : -

ATOMIC FORCE MICROSCOPE (AFM)

Organisation : MIMOS BERHAD (MIMOS)
Function : ATOMIC FORCE MICROSCOPE (AFM) IS A HIGH PERFORMANCE TOOLS THAT OFFERS HIGH-RESOLUTION IMAGING AND PRECISE SURFACE MEASUREMENTS AT THE NANOSCALE. KEY FEATURES INCLUDE CAPTURING DETAILED IMAGES OF SURFACE TOPOGRAPHY WITH NANOMETER-LEVEL PRECISION, SUITABILITY FOR A WIDE RANGE OF MATERIALS AND SAMPLE TYPES (BOTH HARD AND SOFT), AND VARIOUS MODES FOR MEASURING MECHANICAL, ELECTRICAL, AND MAGNETIC PROPERTIES. AFM IS WIDELY USED IN FIELDS SUCH AS MATERIALS SCIENCE, NANOTECHNOLOGY, SEMICONDUCTOR RESEARCH, AND LIFE SCIENCES TO STUDY SURFACE STRUCTURES AND PROPERTIES AT THE ATOMIC SCALE.
Capacity : -

NANO AND MICRO INDENTER + SPM

Organisation : MIMOS BERHAD (MIMOS)
Function : AN INSPECTION SYSTEM TO MEASURE MECHANICAL PROPERTIES OF MATERIALS (HARDNESS AND REDUCED MODULUS) WHERE SIZE OR PRECISE LOCATION ARE LIMITING FACTORS AND DICTATE NANOSCALE TESTING REGIME.
General Specifications : NORMAL LOAD:
- MAXIMUM LOAD 10MN.
- MAX DISPLACEMENT 5µM
HIGH LOAD:
- MAXIMUM LOAD 10N
- MAXIMUM DISPLACEMENT 80µM
IN-SITU IMAGING
- QUALITATIVE SURFACE ANALYSIS BEFORE AND AFTER TESTING
NANOINDENTATION
- QUANTITATIVE MATERIAL PROPERTIES INCLUDING HARDNESS AND MODULUS
Capacity : -

FIELD EMMISION SCANNING ELECTRON MICROSCOPE (FESEM) + EDS

Organisation : MIMOS BERHAD (MIMOS)
Function : FIELD EMISSION SCANNING ELECTRON MICROSCOPY (FE-SEM) IS AN ADVANCED TECHNOLOGY USED TO CAPTURE THE MICROSTRUCTURE IMAGE OF THE MATERIALS.THE SYSTEM PRODUCES ULTRA HIGH RESOLUTION 1NM IMAGE QUALITY. THIS INSTRUMENT IS USED TO EXAMINE OBJECTS ON A VERY FINE SCALE, CAN YIELD TO THE TOPOGRAPHY AND MORPHOLOGY.
General Specifications : RESOLUTION: 1.3NM @ 1KV
Capacity : -

VARIABLE PRESSURE FIELD EMISION SCANNING ELECTRON MICROSCOPE (VPFESEM) + EDS+WDS+EBSD+STEM+CL

Organisation : MIMOS BERHAD (MIMOS)
Function : VARIABLE PRESSURE FIELD EMISSION SCANNING ELECTRON MICROSCOPY (VPFESEM) IS AN ADVANCED TECHNOLOGY THAT ALLOWS HIGH-RESOLUTION IMAGING OF SAMPLES IN VARIABLE PRESSURE CONDITIONS, ENABLING THE EXAMINATION OF BOTH CONDUCTIVE AND NON-CONDUCTIVE SAMPLES WITHOUT EXTENSIVE PREPARATION.
General Specifications : RESOLUTION: 0.9NM @ 1KV
Capacity : -

DUAL BEAM (FIB + FESEM) + EDS

Organisation : MIMOS BERHAD (MIMOS)
Function : THE DUAL-BEAM FOCUSED-ION-BEAM (FIB) WORKSTATION CONSISTS OF A FIB COLUMN AND A FIELD EMMISION SCANNING ELECTRON MICROSCOPE (FESEM) COLUMN ON THE SAME PLATFORM. USES INCLUDE ION MILLING, METAL DEPOSITION, ION IMAGING, AND ELECTRON IMAGING ON THE MICROMETER AND NANOMETER SCALE OF ADVANCED MATERIALS AND DEVICES.DUAL BEAM HAS THE ABILITY TO PERFORM PRECISION MICRO CROSS-SECTIONS OF IC FEATURES AND DEPOSITION OF CONDUCTOR WITHIN SUB-MICRON TOLERANCES. IT HAS THE CAPABILITY TO LOCALIZE THE MODIFICATION TO ONLY THE AREA REQUIRING ALTERATION. ITS APPLICATION WILL COVER OPEN PROBE HOLES, REWIRE CIRCUITS, DEVICE ISOLATION AND GENERATE HIGH-RESOLUTION 1 NM IMAGE QUALITY USING FESEM.
General Specifications : RESOLUTION FESEM: 1NM @ 5KV
Capacity : -

TRANSMISSION ELECTRON MICROSCOPE (TEM) + EDS + EELS

Organisation : MIMOS BERHAD (MIMOS)
Function : TRANSMISSION ELECTRON MICROSCOPY (TEM) IS A TECHNIQUE USED TO OBSERVE THE FEATURES OF VERY SMALL STRUCTURES. IT IS AN INSPECTION SYSTEM TO EXAMINE FINE DETAIL WITHIN ANGSTROM LEVEL RESOLUTION AND MAGNIFICATIONS BEYOND 1,000,000X ARE ATTAINABLE. THE TECHNOLOGY USES AN ACCELERATED BEAM OF ELECTRONS, WHICH PASSES THROUGH A VERY THIN SPECIMEN TO OBSERVE FEATURES SUCH AS THE STRUCTURE, CRYSTALLIZATION, MORPHOLOGY AND NANO-SCALE DEFECTS.
General Specifications : RESOLUTION: 0.2 NM @ 200KV
Capacity : -

CRYO ULTRAMICROTOME

Organisation : MIMOS BERHAD (MIMOS)
Function : A SAMPLE PREPARATION TOOL FOR CUTTING SOFT SPECIMENS INTO EXTREMELY THIN SLICES, CALLED ULTRA-THIN SECTIONS, THAT CAN BE STUDIED IN A TRANSMISSION ELECTRON MICROSCOPE (TEM)
General Specifications : -
Capacity : -

ENERGY DISPERSIVE SPECTROMETER (EDS) FOR FESEM, VPFESEM, DUALBEAM AND TEM

Organisation : MIMOS BERHAD (MIMOS)
Function : ENERGY DISPERSIVE SPECTROMETER ATTACHMENT TO FESEM, DUAL BEAM AND TEM, IT HAS THE CAPABILITY TO DETERMINE AND QUANTIFY THE COMPOSITION OF THE ELEMENTS AND COMPOUNDS: THAT THE OBJECT IS COMPOSED OF AND THE RELATIVE AMOUNTS OF THEM. AN ELEMENTAL ANALYSIS TOOL FOR BULK ANALYSIS
General Specifications : ELEMENT DETECTION: BORON TO URANIUM
PENETRATION DEPTH : 0.5 - 3UM
Capacity : -

WAVELENGTH DISPERSIVE SPECTROMETER (WDS) FOR VPFESEM

Organisation : MIMOS BERHAD (MIMOS)
Function : WAVELENGTH DISPERSIVE SPECTROSCOPY (WDS)ATTACHMENT TO VPFESEM IS A TECHNIQUE THAT OFFERS HIGH-RESOLUTION ELEMENTAL ANALYSIS BY MEASURING THE WAVELENGTHS OF X-RAYS EMITTED FROM THE SAMPLE. IT IS MORE PRECISE AND SENSITIVE THAN EDS, PARTICULARLY FOR LIGHT ELEMENTS AND TRACE AMOUNTS.
General Specifications : ELEMENT DETECTION: BERYLLIUM TO PLUTONIUM
Capacity : -

ELECTRON BACKSCATTER DIFFRACTION (EBSD) FOR VPFESEM AND PLASMA FIB

Organisation : MIMOS BERHAD (MIMOS)
Function : THE ELECTRON BACKSCATTER DIFFRACTION (EBSD) ATTACHMENT TO VPFESEM IS A TECHNIQUE THAT PROVIDES MICROSTRUCTURAL-CRYSTALLOGRAPHIC CHARACTERIZATION IN A FIELD EMISSION SCANNING ELECTRON MICROSCOPE (FESEM). EBSD IS PRIMARILY USED TO EXAMINE THE CRYSTALLOGRAPHIC ORIENTATION OF MATERIALS, AS WELL AS TO CHARACTERIZE THE GRAIN STRUCTURE, PHASE IDENTIFICATION, AND MICROTEXTURE OF CRYSTALLINE SAMPLES. THIS TECHNIQUE IS VALUABLE IN FIELDS SUCH AS MATERIALS SCIENCE, GEOLOGY, METALLURGY, AND ENGINEERING FOR UNDERSTANDING THE PROPERTIES AND BEHAVIOR OF CRYSTALLINE MATERIALS
General Specifications : -
Capacity : -

ELECTRON ENERGY LOSS SPECTROSCOPY (EELS) FOR TEM

Organisation : MIMOS BERHAD (MIMOS)
Function : ELECTRON ENERGY LOSS SPECTROSCOPY (EELS) IS A TECHNIQUE THAT PROVIDES ELEMENTAL INFORMATION ON THE NANOMETER SCALE WHEN COUPLED WITH TRANSMISSION ELECTRON MICROSCOPY (TEM) AND SCANNING TRANSMISSION ELECTRON MICROSCOPY (STEM). THE ENERGY OF THE INCIDENT ELECTRONS IS ALTERED (REDUCED) AS THEY PASS THROUGH THE SAMPLE. EELS IS PARTICULARLY USEFUL FOR LIGHT ELEMENT ANALYSIS, SINCE THE X-RAY ENERGIES ARE LOW AND THEY ARE ABSORBED BY MATERIALS IN THE EDS SYSTEM. IN EELS THE ELECTRONS HAVE (ALMOST) THE FULL ENERGY OF 200 KEV AND SO IT IS POSSIBLE TO DETECT AND QUANTIFY ELEMENTS SUCH AS HE, LI AND BE WHICH UNDETECTABLE IN EDS.
General Specifications : -
Capacity : -

RAMAN

Organisation : MIMOS BERHAD (MIMOS)
Function : RAMAN SPECTROSCOPY IS A NON-DESTRUCTIVE CHEMICAL ANALYSIS TECHNIQUE WHICH PROVIDES DETAILED INFORMATION ABOUT CHEMICAL STRUCTURE, PHASE AND POLYMORPHY, CRYSTALLINITY AND MOLECULAR INTERACTIONS. IT IS BASED UPON THE INTERACTION OF LIGHT WITH THE CHEMICAL BONDS WITHIN A MATERIAL. IT ABLE TO PROVIDE IDENTIFICATION/ FINGERPRINT OF ORGANIC AND INORGANICS MATERIALS
General Specifications : -
Capacity : -

UV-VIS-NIR

Organisation : MIMOS BERHAD (MIMOS)
Function : UV-VIS-NIR SPECTROSCOPY IS A QUANTITATIVE TECHNIQUE USED TO MEASURE HOW MUCH A CHEMICAL SUBSTANCE ABSORBS LIGHT. IT MEASURES A MATERIAL’S REFLECTION OR TRANSMISSION BY MEASURING LIGHT INTENSITY/ABSORBENCY AT A SPECIFIC WAVELENGTH. UV-VIS AND NIR SPECTROPHOTOMETERS MEASURE IN THOSE PARTICULAR SPECTRUMS, WITH WAVELENGTH RANGES THAT CAN SPAN 135–3300 NM. SPECTROPHOTOMETRY IS A TOP QUANTITATIVE ANALYSIS METHOD IN FIELDS SUCH AS CHEMISTRY, MATERIALS SCIENCE, SEMICONDUCTORS, AND FORENSIC EXAMINATION, AND IN CLINICAL APPLICATIONS.
General Specifications : -
Capacity : -

AUGER ELECTRON SPECTROSCOPY (AES)

Organisation : MIMOS BERHAD (MIMOS)
Function : AUGER ELECTRON SPECTROSCOPY IS A SURFACE-SENSITIVE ANALYTICAL TECHNIQUE, USEFUL FOR ELEMENTAL ANALYSIS OF SMALL SURFACE FEATURES. IT PROVIDES QUANTITATIVE ELEMENTAL AND CHEMICAL STATE (IONIC BOND ONLY) INFORMATION FROM SURFACES OF SOLID MATERIALS. TYPICAL APPLICATIONS INCLUDE: ANALYSIS OF THIN FILMS AND COATINGS. IT HAS THE CAPABILITY OF PROVIDING QUANTATIVE INFORMATION, DEPTH PROFILING, ELEMENTAL AND CHEMICAL MAPPING FOR IONIC BOND ONLY.
General Specifications : -
Capacity : -

X-RAY PHOTOELECTRON SPECTROSCOPY (XPS)

Organisation : MIMOS BERHAD (MIMOS)
Function : X-RAY PHOTOELECTRON SPECTROSCOPY (XPS), ALSO KNOWN AS ELECTRON SPECTROSCOPY FOR CHEMICAL ANALYSIS (ESCA), IS A TECHNIQUE FOR ANALYZING A MATERIAL’S SURFACE CHEMISTRY FROM CONDUCTIVE TO INSULATING MATERIALS. XPS CAN MEASURE THE ELEMENTAL COMPOSITION, EMPIRICAL FORMULA, CHEMICAL STATE AND ELECTRONIC STATE OF THE ELEMENTS WITHIN A MATERIAL.IT IS USED TO UNDERSTAND SURFACE CHEMISTRY AND INVESTIGATE THE EFFICACY OF SURFACE ENGINEERING. FROM NON-STICK COOKWARE COATINGS TO THIN-FILM ELECTRONICS AND BIO-ACTIVE SURFACES, X-RAY PHOTOELECTRON SPECTROSCOPY IS ONE OF THE STANDARD TOOLS FOR SURFACE CHARACTERIZATION. IT HAS THE CAPABILITY OF PROVIDING QUANTATIVE INFORMATION, DEPTH PROFILING, ELEMENTAL AND CHEMICAL MAPPING
General Specifications : -
Capacity : -

MULTI-TECHNIQUES X-RAY PHOTOELECTRON SPECTROSCOPY (XPS)

Organisation : MIMOS BERHAD (MIMOS)
Function : X-RAY PHOTOELECTRON SPECTROSCOPY (XPS), ALSO KNOWN AS ELECTRON SPECTROSCOPY FOR CHEMICAL ANALYSIS (ESCA), IS A TECHNIQUE FOR ANALYZING A MATERIAL’S SURFACE CHEMISTRY. WITH MULTI-TECHNIQUES, IT IS EQUIPPED WITH ION SCATTERING SPECTROSCOPY (ISS) OR LOW-ENERGY ION SCATTERING (LEIS) IS A HIGHLY SURFACE-SENSITIVE TECHNIQUE USED TO PROBE THE ELEMENTAL COMPOSITION OF THE FIRST ATOMIC LAYER OF A SURFACE, REFLECTED ELECTRON ENERGY LOSS SPECTROSCOPY (REELS) IS A TECHNIQUE USED TO PROBE THE ELECTRONIC STRUCTURE OF THE MATERIAL AT THE SURFACE, TO STUDY PROPERTIES SUCH AS ELECTRONIC BAND GAPS OR THE RELATIVE ENERGY LEVELS OF UNOCCUPIED MOLECULAR ORBITALS CAN BE MEASURED AND UV PHOTOELECTRON SPECTROSCOPY (UPS), THE DATA COMPLEMENTS REELS FOR UNDERSTANDING ELECTRONIC PROPERTIES, PROVIDING INFORMATION ON THE HIGHEST ENERGY OCCUPIED BONDING STATES. THE WIDTH OF A PHOTOELECTRON SPECTRUM CAN BE USED TO MEASURE THE WORK FUNCTION ON SUITABLE SAMPLES
General Specifications : -
Capacity : -

TOF-SECONDARY ION MASS SPECTROMETRY (TOF-SIMS)

Organisation : MIMOS BERHAD (MIMOS)
Function : TIME-OF-FLIGHT SECONDARY ION MASS SPECTROMETRY (TOF-SIMS) PROVIDES ELEMENTAL, CHEMICAL STATE, AND MOLECULAR INFORMATION FROM SURFACES OF SOLID MATERIALS. IT CAN MEASURE EITHER CONDUCTIVE OR INSULATING MATERIALS, AND IT DOES NOT MATTER WHETHER THE SAMPLE IS IN THE FORM OF A POWDER, FIBER, ETC AS LONG AS IT CAN BE INTRODUCED TO A VACUUM. IT CAN OBTAIN INFORMATION REGARDING ELEMENTS OR MOLECULAR SPECIES WITHIN 1 NM OF THE SAMPLE SURFACE AT A VERY HIGH DETECTION SENSITIVITY. IT HAS THE CAPABILITY OF PROVIDING QUANTATIVE INFORMATION PROVIDED THE STANDARD MATERIAL FOR CALIBRATION IS AVAILABLE, DEPTH PROFILING, ELEMENTAL, CHEMICAL AND MOLECULAR MAPPING.
General Specifications : -
Capacity : -

FT-NMR 500MHZ ECA (SOLID STATE)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : ELUCIDATION OF COMPOUND
General Specifications : -
Capacity : RESEARCH

FTIR (SPECTRUM 400) FTIR/ATR

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATRION OF FUNCTIONAL GROPU OF CHARACTERIZING COMPOUND
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

FTIR (FRONTIER)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATRION OF FUNCTIONAL GROPU OF CHARACTERIZING COMPOUND
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

FTIR (RX1)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATRION OF FUNCTIONAL GROPU OF CHARACTERIZING COMPOUND
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

GFAAS-HYDRIDE

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATION OF ELEMENTAL COMPOSITION OF MATERIALS
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

MERCURY ANALYZER

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATION OF ELEMENTAL COMPOSITION OF MATERIALS
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

RHEOMETER MCR301

Organisation : UNIVERSITY OF MALAYA (UM)
Function : MEASRING THE RHEOLOGICAL PROPERTIES OF SAMPLES
General Specifications : -
Capacity : RESEARCH

BACIS AUTOLAB WITH POTENTIOSTAT

Organisation : UNIVERSITY OF MALAYA (UM)
Function : MEASUREMENT OF ELECTROCHEMICAL IN ANALYTE
General Specifications : -
Capacity : RESEARCH

CAPILLARY ELECTROPHORESIS

Organisation : UNIVERSITY OF MALAYA (UM)
Function : ANALYSIS OF DNA
General Specifications : -
Capacity : RESEARCH

GUOY BALANCE

Organisation : UNIVERSITY OF MALAYA (UM)
Function : MEASUREMENT OF SAMPLE MASS
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

MICROWAVE DIGESTER

Organisation : UNIVERSITY OF MALAYA (UM)
Function : ANALYTICAL SAMPLE PREPARATION
General Specifications : -
Capacity : TEACHING & LEARNING AND RESEARCH

GPC (MALVERN)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF MOLECULE BY MOLUCULAR WEIGHT
General Specifications : -
Capacity : RESEARCH

GPC (WATERS)

Organisation : UNIVERSITY OF MALAYA (UM)
Function : SEPARATION OF MOLECULE BY MOLUCULAR WEIGHT
General Specifications : -
Capacity : RESEARCH

ION CHROMATOGRAPHY

Organisation : NANOMALAYSIA BERHAD (NMB)
Function : SEPARATE IONS BASED UPON THEIR INTERACTIONS WITH RESIN (STATIONARY PHASE) AND THE ELUENT (MOBILE PHASE)
General Specifications : HIGH THROUGHPUT AND HIGH-SPEED MULTI-SAMPLE TREATMENT WITH SUPPRESSOR ANION ANALYSI
Capacity : CONTINOUS 150-250 SAMPLES

COMPUTATIONAL INFRASTRUCTURE, ALGORITHMS WITH CAPABILITY TO SIMULATE ADVANCED FLUIDS AND PROCESS PHYSICS E.G. NON-NEWTONIAN FLUIDS, SUSPENSIONS, VISCOELASTIC FLUIDS.

Organisation : MONASH UNIVERSITY MALAYSIA (MONASH)
Function : SIMULATION CAPABILITIES OF THE ALGORITHM INCLUDE:
I. NON-NEWTONIAN FLUIDS,
II. SUSPENSIONS,
III. VISCOELASTIC FLUIDS,
IV. TURBULENT FLUID MECHANICS.
General Specifications : LATTICE-BOLTZMANN METHOD-BASED ALGORITHMS (BOTH IN-HOUSE CODED AND UTILISIING OPEN-SOURCE PALABOS LIBRARY IMPLEMENTATION)
Capacity : (PC WORKSTATION): 4.00GHZ 8MB L3 PROCESSOR, 64GB RAM, 2TB STORAGE, SUPPORTS MESH UP TO ~1 X 10^6 ELEMENTS

CHN

Organisation : UNIVERSITY OF MALAYA (UM)
Function : DETERMINATION OF ELEMENTAL COMPOSITION OF MATERIALS
General Specifications : -
Capacity : RESEARCH

COMMERCIALIZATION MATCHING PLATFORM

FIND YOUR MATCH HERE

ORBITAL SHAKER

KRUSS EASYDROP

BLENDER

CRYOULTRAMICROTOME

MICROMETER CALIPER

ABRASION TESTING MACHINE

HIGH PERFORMANCE THIN-LAYER CHROMATOGRAPHY (HPTLC)

UNCONFINED COMPRESSIVE STRENGTH APPARATUS

LASER

PPMU-MJIIT/ FOURIER TRANSFORM INFRARED SPECTROSCOPY (FTIR)

PYROLYZER-GAS CHROMATOGRAPHY X GAS CHROMATOGRAPHY-TIME OF FLIGHT-MASS SPECTROMETER (PY-GCXGC-TOF-MS)

AUTO BUFFING MACHINE WITH DUST COLLECTOR

PYROLISER- GAS CHROMATOGRAPHY-MASS SPECTROMETER (PY-GCMS)

ELEMENTAL ANALYSIS / CHNOS

THERMAL GRAVIMETRIC ANALYZER (TGA)

PARTICLE SIZE ANALYZER (LASER DIFFRACTION)

ELECTROANALYTICAL SYSTEM 2

DNA ENGINE / PCR MACHINE

PH METER

THERMAL GRAVIMETRIC ANALYZER

OVEN

FIELD EMISSION SCANNING ELECTRON MICROSCOPE (FESEM), FEI, VERIOS 460L

SAW MACHINE

AUTOCLAVE

BIOHAZARD

MIST ATOMIZER

VARIABLE-PRESSURE SCANNING ELECTRON MICROSCOPE (VPSEM) WITH EDX

PLASTOGRAPH/INTERVAL MIXER

TENSILE STRENGTH INSTRUMENT

THERMOGRAVIMETRIC TG DTA

HIGH SPEED CENTRIFUGE

PSL-HUB/ SCANNING ELECTRON MICROSCOPE (SEM)

UV -VIS SPECTROPHOTOMETER

FALLING HEAD PERMEABILITY APPARATUS

VARIOUS OF TESTING FACILITIES FOR RUBBER (SPECIALISED RUBBER PRODUCT TEST)

X-RAY DIFFRACTION (XRD) POWDER

PILOT PLANT

HEADSPACE-GAS CHROMATOGRAPHY-FLAME IONIZATION DETECTOR (HS-GC-FID)

ION CHROMATOGRAPHY (IC)

GAS CHROMATOGRAPHY - FLAME IONIZATION DETECTOR

PARTICLE SIZE ANALYZER

UNIVERSAL TESTING MACHINE

THERMOGRAVIMETRIC ANALYSIS (TGA)

BENCHTOP AUTOCLAVE

LC-MS QTOF LIQUID CHROMATOGRAPHY HIGH RESOLUTION QTOF SYSTEM (LC-QTOF)

FLUORESCENCE SPECTROMETER

LCMS-QQQ TRIPLE QUADRUPOLE LC/MS SYSTEM

AUTOCLAVE

PPMU / NUCLEAR MAGNETIC RESONANCE (NMR) SPECTROSCOPY

BENDING MACHINE

RAMAN SPECTROMETER

FLAME ATOMIC ABSORPTION SPECTROMETER (AAS)

COMPRESSION MOULDING

WOOD CHIPPER MACHINE

GC-FPD GAS CHROMATOGRAPHY FLAME PHOTOMETRIC DETECTOR

ELECTORSPUN

RESISTIVITY METER

VISCOMETER

SURFACE ANALYZER

AUTOCLAVE

DYNAMIC CONTACT ANGLE

UNIVERSAL TESTING MACHINE 5582

ION CHROMATOGRAPHY

RHEOMETER (COLLOIDS)

MOONEY MACHINE

PPMU / DIFFERENTIAL SCANNING CALORIMETRY (DSC)

GC-ECD GAS CHROMATOGRAPHY ELECTRON CAPTURE DETECTOR

DENSITOMETER (2D GEL ANALYSIS)

TENSILE TESTING MACHINE-INSTRON 3382 UNIVERSAL TESTING MACHINE

CHNS

TOTAL ORGANIC CARBON

LIMITING OXYGEN INDEXER

MICROTOMES

PPMU-MJIIT/ GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS)

GROWTH / HUMIDITY CHAMBER

VARIOUS TESTING FACILITIES FOR CONSTRUCTION MATERIALS

INDICATOR

AIR COMPRESSOR

COMMERCIALIZATION
MATCHING PLATFORM